Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual page 84

6. Press to select the desired settings, and then press
Plain*
Plain Thick
Covers
Covers Thick
Label
Coated
Coated Thick
Recycled
Envelope
Plain S2
Plain Thick S2
Covers S2
Covers Thick S2
Coated S2
Recycled S2
7. Press to begin copying.
Reduce/Enlarge
You can reduce or enlarge the size of a copied image, from 25 percent to 400 percent when you copy original documents from the document glass or ADF.
NOTE: When you make a reduced copy, black lines may appear at the bottom of your copy.
To select from the predefined copy sizes:
1. Load the document to be copied on the document glass, and close the cover.
2. Press until >COPY appears, and then press
3. Press until Reduce/Enlarge appears.
4. Press to select the desired settings, and then press
100%*
Stmt®Ltr (129%)*1/A5®B5 (122%)*2
Stmt®Lgl (154%)*1/A5®A4 (141%)*2
200%
Custom 100%
50%
Ldgr®Ltr (64%)*1/A4®A5 (70%)*2
Lgl®Ltr (78%)*1/B5®A5 (81%)*2
1
* These options are displayed when SETUP ® Admin Menu ® System Settings ® mm/inch is set to inch.
2
* These options are displayed when SETUP ® Admin Menu ® System Settings ® mm/inch is set to mm.
NOTE: You can set the value in a percent for Custom.
5. Press to begin copying.
Original Type
The Original Type setting is used to improve the image quality by selecting the document type for the current copy job.
To select the image quality:
1. Load the document to be copied on the document glass, and close the cover.
.
.
.