3. Enter the following:
Name
l
Address
l
4. Click the Apply New Settings button.
Sending an E-mail With the Scanned File
1. From the operator panel, press
2. Press
until Scan to E-Mail appears, and then press
3. Press
or
to select the setting listed below, and then press
Enter E-Mail: Type the e-mail address directly.
Address Book: Select the e-mail address registered in the Address Book.
NOTE:
Users need to be registered before you can select Address Book on the operator panel.
4. Press
to select TO or BCC.
until >SCAN appears, and then press
.
.
.