Timer Installation; Indoor Model Installation - Toro 53765 - Outdoor Ecxtra Sprinkler Timer User Manual

Timer Installation

Note: The ECXTRA indoor timer is not weather resis-
tant and must be installed indoors or in a protected
area.

Indoor Model Installation

1. Select a location for the timer within 4' of an
electrical outlet to enable the transformer cord to
easily reach. Make sure the outlet is not controlled
by a light switch.
2. Remove the mounting bracket attached to the back
of the timer housing by pulling the lower edge of the
bracket away and downward from the timer housing.
3. Place the mounting bracket (A) against the wall align-
ing the top edge at about eye level. Drive three 1"
wood screws (B) into the wall through the three holes
provided in the bracket.
Note: If you are installing the bracket on drywall or
masonry, install screw anchors (C) to prevent screws
from loosening.
4. Optional - Insert 3/4" PVC conduit (D) for valve
wiring into bracket sleeve (E).
5. Align the slotted openings on the back of timer hous-
ing with the mounting bracket tabs. Slide the timer
downward to engage the tabs.
6
A
F
E
D
Note: After installation, store the Quick Reference
Guide and the Watering Schedule Form in the
pocket (F) behind the timer.
B
C