Setting Zone Run Times - Toro 53765 - Outdoor Ecxtra Sprinkler Timer User Manual

Setting Zone Run Times

Turn the control dial to the
position.
Check the
PROGRAMS
reposition the switch to select the desired program.
Zone number 1 will be flashing and its current run
time or OFF will be shown. To select a different zone
number, press the +/
desired zone number is flashing.
Press the
NEXT
begin flashing.
To set the run time, press the +/
until the desired run time is shown.
Note: To remove the run time, select OFF by press-
and –/
ing the +/
ON
Press the
NEXT
begin flashing.
7. Repeat steps
or remove the run time for the remaining zones .
8. To set the zone run time for another program, repeat
all of the steps starting at step
Return the control dial to the
28
SET ZONE TIMES
switch setting. If necessary,
or –/ button until the
ON OFF
button. The run time (or OFF) will
or –/
ON OFF
buttons at the same time.
OFF
button. The next zone number will
and as needed to set, change,
.
position.
RUN
Note: Basic programming is now complete.
If the ECXTRA is controlling a water supply pump,
button
continue at "Pump Control" on page 29 for important
operating information.
2 4
2 4
PGM A
9
1 2 3 4 5 6
9
3
3
1
1 2
5
5
3 5
3 5
4 5
4 5
3 5 3 5