1
hard-drive assembly
9 Remove the four screws that secure the hard-drive bracket to the hard
drive.
10 Lift the hard-drive bracket off the hard drive.
1
hard drive
3
screws (4)
Replacing the Hard Drive
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
3 Place the hard drive in the hard-drive bracket.
4 Replace the four screws that secure the hard-drive bracket to the hard
drive.
5 Place the hard-drive assembly on the computer base.
6 Slide the hard-drive assembly to connect it to the connector on the system
board.
2
screws (3)
2
hard-drive bracket
3
2
1
Hard Drive
51
Need help?
Do you have a question about the Inspiron N7110 and is the answer not in the manual?
Questions and answers