Download
Share
Print this page
Denon AVR 2808CI - AV Receiver Manual
  1. Manuals
  2. Brands
  3. Denon Manuals
  4. Receiver
  5. AVR 2808CI - AV Receiver
  6. Manual
Denon AVR 2808CI - AV Receiver Manual

Denon AVR 2808CI - AV Receiver Manual

Serial protocol
Hide thumbs Also See for AVR 2808CI - AV Receiver:

Advertisement

Quick Links

Download this manual See also: User Manual
DENON AVR control protocol
Application model : AVR-2808CI
Application terminal: RS-232C
Connector specification
Ⅰ. RS-232C
Connector type: DB-9pin female type, slave straight connection (DCE type)
( 1pin : GND , 2pin : TxD , 3pin : RxD , 5pin : Common(GND) , 4,6,7,8,9pin : NC )
Communication format:
Synchronous system
Communication system
Communication speed
Character length
Parity control
Start bit
Stop bit
Communication procedure
Communication data length
: Tone step synchronization
: A half duplex
: 9600bps
: 8 bits
: None
: 1 bit
: 1 bit
: Non procedural
: 135 bytes (maximum)
- 1 -
Ver. 5.3.0.for 2808CI

Advertisement

loading
Need help?

Need help?

Do you have a question about the AVR 2808CI - AV Receiver and is the answer not in the manual?

Questions and answers

Related Manuals for Denon AVR 2808CI - AV Receiver

Summary of Contents for Denon AVR 2808CI - AV Receiver

  • Page 1 DENON AVR control protocol Ver. 5.3.0.for 2808CI Application model : AVR-2808CI Application terminal: RS-232C Connector specification Ⅰ. RS-232C Connector type: DB-9pin female type, slave straight connection (DCE type) ( 1pin : GND , 2pin : TxD , 3pin : RxD , 5pin : Common(GND) , 4,6,7,8,9pin : NC )
  • Page 2 Protocol specification The following three data forms are defined. COMMAND The message sent to a system(AVR) from a controller(Touch Panel etc.) A command to a system is given from a controller. EVENT The message sent to a controller (Touch Panel etc.) from a system (AVR) The result is sent, when a system is operated directly and a state changes.
  • Page 3 The example of a command * <CR> is the meaning of 0x0D. SIDVD<CR> : Select Input source DVD MSSTEREO<CR> : surround Mode Set to STEREO MVUP<CR> : Master Volume UP PWON<CR> : system Power ON PWSTANDBY<CR> : system Power STANDBY SI?<CR>...
  • Page 4 Others A) COMMAND is receivable also during transmission of EVENT. B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE changes, the value of the channel volume of all channels returns as EVENT. C) CHANNEL VOLUME returns the data of ALL channels by the present SURROUND MODE also including an intact channel. In this case, the data of an intact channel is set to "50".
  • Page 5 COMMAND and PARAMETER list COMMAND PARAMETER function example POWER ON/STANDBY change PWON<CR> STANDBY PWSTANDBY<CR> Return PW Status PW?<CR> MASTER VOLUME UP/DOWN , direct change to **dB MVUP<CR> DOWN MVDOWN<CR> **:00 to 99 by ASCII , 80=0dB, 99=---(MIN) MV80<CR> MV?<CR> Return MV Status FL UP CHANNEL VOLUME UP/DOWN , direct change to **dB CVFL UP<CR>...
  • Page 6 COMMAND PARAMETER function example SB UP CVSB UP<CR> ---SURROUND BACKch (SBch 1SP) SB DOWN CVSB DOWN<CR> SB ** **:00 to 99 by ASCII , 50=0dB CVSB 50<CR> Return CV Status CV?<CR> OUTPUT MUTE ON/OFF change MUON<CR> MUOFF<CR> Return MU Status MU?<CR>...
  • Page 7 COMMAND PARAMETER function example AUTO set AUTO mode SDAUTO<CR> (Priority:HDMI>>DIGITAL>>ANALOG) HDMI set force HDMI INPUT mode SDHDMI<CR> DIGITAL set force DIGITAL INPUT SDDIGITAL<CR> (Optical,Coaxial)mode ANALOG set force ANALOG INPUT mode SDANALOG<CR> EXT.IN-1 ---Set EXT.IN mode at AVR-2808 SDEXT.IN-1<CR> SD?<CR> Return SD Status AUTO DCAUTO<CR>...
  • Page 8 COMMAND PARAMETER function example CLASSIC CONCERT MSCLASSIC CONCERT<CR> MONO MOVIE MSMONO MOVIE<CR> MATRIX MSMATRIX<CR> VIDEO GAME MSVIDEO GAME<CR> VIRTUAL MSVIRTUAL<CR> Return MS Status MS?<CR> QUICK1 QUICK SELECT 1-3 MODE SELECT MSQUICK1<CR> QUICK2 MSQUICK2<CR> QUICK3 MSQUICK3<CR> QUICK1 MEMORY USER1-3 MODE MEMORY MSQUICK1 MEMORY<CR>...
  • Page 9 COMMAND PARAMETER function example TONE DEFEAT ON PARAMETER setting PSTONE DEFEAT ON<CR> TONE DEFEAT OFF PSTONE DEFEAT OFF<CR> TONE DEFEAT ON/OFF TONE DEFEAT ? PSTONE DEFEAT ?<CR> Return PSTONE DEFEAT Status SB:MTRX ON PSSB:MTRX ON<CR> SURROUND BACK SP MODE set SB:NON MTRX PSSB:NON MTRX<CR>...
  • Page 10 COMMAND PARAMETER function example TRE UP PSTRE UP<CR> TREBLE UP/DOWN , direct change to **dB TRE DOWN PSTRE DOWN<CR> **:00 to 99 by ASCII , 50=0dB TRE ** ---AVR-2808 can be operated from -6 to +6(44 to 56) PSTRE 50<CR> TRE ? Return PSTRE Status PSTRE ?<CR>...
  • Page 11 COMMAND PARAMETER function example PAN ON PSPAN ON<CR> PANORAMA ON/OFF PAN OFF PSPAN OFF<CR> PAN ? Return PSPAN Status PSPAN ?<CR> DIM UP DIMENSION UP/DOWN , direct change to **dB PSDIM UP<CR> DIM DOWN **:00 to 99 by ASCII , 00=0, PSDIM DOWN<CR>...
  • Page 12 COMMAND PARAMETER function example NIGHT OFF PSNIGHT OFF<CR> NIGHT MODE direct change NIGHT LOW PSNIGHT LOW<CR> NIGHT MID PSNIGHT MID<CR> NIGHT HI PSNIGHT HI<CR> NIGHT ? Return PSNIGHT Status PSNIGHT ?<CR> RSTR OFF AUDIO RESTORER direct change PSRSTR OFF<CR> RSTR MODE1 PSRSTR MODE1<CR>...
  • Page 13 COMMAND PARAMETER function example PHONO Z2PHONO<CR> MULTI ZONE-2 mode set , and select source at AVR-2808 ---The name of PARAMETER is IPOD the same as that of the time of SI COMMAND. Z2IPOD<CR> SOURCE MULTI ZONE-2 mode cancel at AVR-2808 Z2SOURCE<CR>...
  • Page 14 COMMAND PARAMETER function example Z2PS BAS UP ZONE2 BASS UP/DOWN , direct change to **dB Z2PSBAS UP<CR> BAS DOWN **:00 to 99 by ASCII , 00=0dB Z2PSBAS DOWN<CR> BAS ** ---AVR-2808 can be operated from -10 to +10(40 to 60) Z2PSBAS 00<CR>...
  • Page 15 COMMAND PARAMETER function example PHONO MULTI ZONE-3 mode set , and select source at AVR-2808 Z3PHONO<CR> ---The name of PARAMETER is IPOD Z3IPOD<CR> the same as that of the time of SI COMMAND. SOURCE Z3SOURCE<CR> MULTI ZONE-3 mode cancel Z3UP<CR> MULTI ZONE-3 VOLUME UP/DOWN , direct change to **dB DOWN Z3DOWN<CR>...
  • Page 16 COMMAND PARAMETER function example Z3PS BAS UP ZONE3 BASS UP/DOWN , direct change to **dB Z3PSBAS UP<CR> BAS DOWN **:00 to 99 by ASCII , 00=0dB Z3PSBAS DOWN<CR> BAS ** ---AVR-2808 can be operated from -10 to +10(40 to 60) Z3PSBAS 00<CR>...
  • Page 17 ※ ANALOG TUNER Control（AVR Model Only） COMMAND PARAMETER function example ANUP TUNER Frequency UP/DOWN TFANUP<CR> ANDOWN TFANDOWN<CR> AN****** --- ****.** kHz at AM band (>050000 is AM.) TFAN105000<CR> (6 digits) ****.** MHz at FM band (<050000 is FM.) (1050.00kHz at AM) Return TF Status TFAN?<CR>...
  • Page 18 ※XM Control(North America model only) COMMAND PARAMETER function example XMUP XM Channel UP/DOWN TFXMUP<CR> XMDOWN TFXMDOWN<CR> XM*** --- ***:XM CH No. TFXM001<CR> (3 digits) (XM001 CH at XM) Return TFXM Status TFXM?<CR> XMUP XM PRESET CH UP/DOWN , direct change to No.** TPXMUP<CR>...
  • Page 19 ※iPod Extended Control COMMAND PARAMETER function example “Cursor Up” Control IP90<CR> “Cursor Down” Control IP91<CR> “Cursor Left” Control IP92<CR> IP93<CR> “Cursor Right” Control IP94<CR> “Enter (Play/Pause)” Control IP9A<CR> “Play/Pause” Control IP9C<CR> “Stop” Control “Skip Plus” Control IP9D<CR> “Skip Minus” Control IP9E<CR>...
  • Page 20 ※Cursol/Enter/Menu(Setup) COMMAND PARAMETER function example “Cursor Up” Control MNCUP<CR> “Cursor Down” Control MNCDN<CR> “Cursor Left” Control MNCLT<CR> MNCRT<CR> “Cursor Right” Control MNENT<CR> “Enter” Control MNRTN<CR> “RETURN” Control MEN ON MNMEN ON<CR> “GUI Menu ON” Control MEN OFF “GUI Menu OFF” Control MNMEN OFF<CR>...
  • Page 21 ※Remote Lock/Panel Lock COMMAND PARAMETER function example REMOTE LOCK ON REMOTE CONTROL LOCK ON/OFF SYREMOTE LOCK ON<CR> REMOTE LOCK OFF SYREMOTE LOCK OFF<CR> PANEL LOCK ON PANEL BUTTON(Except MASTER VOL.)CONTROL LOCK ON SYPANEL LOCK ON<CR> PANEL+V LOCK ON SYPANEL+V LOCK ON<CR> PANEL BUTTON &...
  • Page 22 EVENT(or RESPONSE) and PARAMETER list EVENT PARAMETER function example POWER ON/STANDBY change PWON<CR> STANDBY PWSTANDBY<CR> MV80<CR> MASTER VOLUME change , **:00 to 99 by ASCII 98 = +18dB(MAX) 80 = 0dB 00 = -80dB 99 = ---(MIN) FL ** CVFL 50<CR> CHANNEL VOLUME change , **:00,38 to 62 by ASCII FR ** CVFR 50<CR>...
  • Page 23 EVENT PARAMETER function example SIXM<CR> (North America model Only) IPOD SIIPOD<CR> MAIN-ZONE ON/OFF change ZMON<CR> ZMOFF<CR> PHONO REC SELECT source change SRPHONO<CR> ---The name of PARAMETER is IPOD SRAUXIPOD<CR> the same as that of the time of SI COMMAND. SOURCE SRSOURCE<CR>...
  • Page 24 EVENT PARAMETER function example DIRECT MSDIRECT<CR> SURROUND mode change PURE DIRECT MSPURE DIRECT<CR> STEREO MSSTEREO<CR> MULTI CH IN MSMULTI CH IN<CR> MULTI CH IN MSM CH IN+PL2X C<CR> +PL2x C MULTI CH IN MSM CH IN+PL2X M<CR> +PL2x M MULTI CH DIRECT MSMULTI CH DIRECT<CR>...
  • Page 25 EVENT PARAMETER function example DTS NEO:6 C MSDTS NEO:6 C<CR> DTS NEO:6 M MSDTS NEO:6 M<CR> DTS SURROUND MSDTS SURROUND<CR> DTS ES DSCRT6.1 MSDTS ES DSCRT6.1<CR> DTS ES MTRX6.1 MSDTS ES MTRX6.1<CR> DTS+NEO:6 MSDTS+NEO:6<CR> DTS+PL2x C MSDTS+PL2X C<CR> DTS+PL2x M MSDTS+PL2X M<CR>...
  • Page 26 EVENT PARAMETER function example NEURAL MSNEURAL<CR> (North America model Only) DOLBY D+ MSDOLBY D+<CR> DOLBY D+ +EX MSDOLBY D+ +EX<CR> DOLBY D+ +PL2x C MSDOLBY D+ +PL2X C<CR> DOLBY D+ +PL2x M MSDOLBY D+ +PL2X M<CR> DOLBY TRUEHD MSDOLBY HD<CR> DOLBY HD MSDOLBY HD<CR>...
  • Page 27 EVENT PARAMETER function example TONE DEFEAT ON PSTONE DEFEAT ON<CR> TONE DEFEAT ON/OFF change TONE DEFEAT OFF PSTONE DEFEAT OFF<CR> SB:MTRX ON SURROUND BACK MODE change PSSB:MTRX ON<CR> SB:NON MTRX PSSB:NON MTRX<CR> SB:PL2xC PSSB:PL2X CINEMA<CR> SB:PL2xM PSSB:PL2X MUSIC<CR> SB:ON PSSB:ON<CR> SB:OFF PSSB:OFF<CR>...
  • Page 28 EVENT PARAMETER function example DRC AUTO PSDRC AUTO<CR> DRC change DRC LOW PSDRC LOW<CR> DRC MID PSDRC MID<CR> DRC HI PSDRC HI<CR> DRC OFF PSDRC OFF<CR> DCO OFF D.COMP change PSDCO OFF<CR> DCO MID PSDCO MID<CR> DCO LOW PSDCO LOW<CR> DCO MID PSDCO MID<CR>...
  • Page 29 EVENT PARAMETER function example DELAY *** PSDELAY 200<CR> AUDIO DELAY change, ***:000 to 999 by ASCII ---AVR-2808：200=200ms（MAX） 100=100ms, 000=0ms NIGHT OFF NIGHT MODE change PSNIGHT OFF<CR> NIGHT LOW PSNIGHT LOW<CR> NIGHT MID PSNIGHT MID<CR> NIGHT HI PSNIGHT HI<CR> RSTR OFF AUDIO RESTORER change PSRSTR OFF<CR>...
  • Page 30 EVENT PARAMETER function example PHONO Z2PHONO<CR> MULTI ZONE-2 source change ---The name of PARAMETER is IPOD the same as that of the time of SI COMMAND. Z2IPOD<CR> SOURCE MULTI ZONE-2 mode cancel Z2SOURCE<CR> MULTI ZONE-2 VOLUME change , **:10 to 99 by ASCII Z280<CR>...
  • Page 31 EVENT PARAMETER function example PHONO Z3PHONO<CR> MULTI ZONE-3 source change ---The name of PARAMETER is AUXIPOD the same as that of the time of SI COMMAND. Z3AUXIPOD<CR> SOURCE MULTI ZONE-3 mode cancel Z3SOURCE<CR> MULTI ZONE-3 VOLUME change , **:10 to 99 by ASCII Z380<CR>...
  • Page 32 ※ANALOG TUNER Control（AVR Model Only） EVENT PARAMETER function example AN****** TUNER Frequency change TFAN105000<CR> (6 digits) (1050.00kHz at AM) --- ****.** kHz at AM band ****.** MHz at FM band AN**(PRESET No.) TPANA1<CR> TUNER PRESET change to No.** (PRESET No.”A1”) TUNER BAND , MODE change ANAM ---Band set to AM...
  • Page 33 ※XM Control(North America model only) EVENT PARAMETER function example XM*** (3 digits) --- ***:XM CH No. TFXM001<CR> (XM001 CH) XM**(PRESET No.) XM PRESET change to No.** TPXMA1<CR> (PRESET No.”A1”) CH NAME ******** XM CH NAME change TMCH NAME 20 on 20<CR> (8 digit) ARTIST XM ARTIST NAME change...
  • Page 34 ※iPod Extended Control EVENT PARAMETER function example Onscreen Display Information is Answered By the IPA Command. IPA0***************_???<CR> Display Line1 Information Display Line3 Information IPA1※*************_???<CR> Display Line4 Information IPA2※*************_???<CR> Display Line5 Information IPA3※*************_???<CR> Display Line6 Information IPA4※*************_???<CR> Display Line7 Information IPA5※*************_???<CR> Display Line8 Information IPA6※*************_???<CR>...
  • Page 35 EVENT PARAMETER function example <example1-for ASD-1R> IPA0Artist??????????????????<CR> IPA1※ Ana Caram_????????????<CR> IPA2※ Badi Assad_???????????<CR> IPA3※ Christy Baron_????????<CR> IPA4※ Marta Gomez_??????????<CR> IPA5※ Rebecca Pidgeon_??????<CR> IPA6※ Sara K_???????????????<CR> IPA7※ Valerie Joyce_????????<CR> IPA8# SFL Songs RPT All_???<CR> IPA9 6]_?????????<CR> <example2-for ASD-1R> IPA0Now Playing iPod_???????<CR> IPA1※...
  • Page 36 EVENT PARAMETER function example <example1-for ASD-3N/W> IPA0Artist??????????????????<CR> IPA1※Ana Caram_????????????<CR> IPA2※Badi Assad_???????????<CR> IPA3※Christy Baron_????????<CR> IPA4※Marta Gomez_??????????<CR> IPA5※Rebecca Pidgeon_??????<CR> IPA6※Sara K_???????????????<CR> IPA7※_?????????????????????<CR> IPE8# SFL On RPT All_???<CR> IPA9 6]_?????????<CR> <example2-for ASD-3N/W> IPA0Now Playing iPod_???????<CR> IPA1※ A HARD DAY'S NIGHT._??<CR> IPA2※ /The Beatles_?????????<CR> IPA3※_??????????????????????<CR>...
  • Page 37 EVENT PARAMETER function example Onscreen Display Information(iPOD) is Answered By the IPA Command. Display Line1 Information IPE0***************_???<CR> Display Line3 Information IPE1※*************_???<CR> Display Line4 Information IPE2※*************_???<CR> Display Line5 Information IPE3※*************_???<CR> Display Line6 Information IPE4※*************_???<CR> Display Line7 Information IPE5※*************_???<CR> Display Line8 Information IPE6※*************_???<CR>...
  • Page 38 EVENT PARAMETER function example <example1-for ASD-1R> IPE0Artist??????????????????<CR> IPE1※ Ana Caram_????????????<CR> IPE2※ Badi Assad_???????????<CR> IPE3※ Christy Baron_????????<CR> IPE4※ Marta Gomez_??????????<CR> IPE5※ Rebecca Pidgeon_??????<CR> IPE6※ Sara K_???????????????<CR> IPE7※ Valerie Joyce_????????<CR> IPE8# SFL Songs RPT All_???<CR> IPE9 6]_?????????<CR> <example2-for ASD-1R> IPE0Now Playing iPod_???????<CR> IPE1※...
  • Page 39 EVENT PARAMETER function example <example1-for ASD-3N/R> IPE0Artist??????????????????<CR> IPE1※ Ana Caram_????????????<CR> IPE2※ Badi Assad_???????????<CR> IPE3※ Christy Baron_????????<CR> IPE4※ Marta Gomez_??????????<CR> IPE5※ Rebecca Pidgeon_??????<CR> IPE6※ Sara K_???????????????<CR> IPE7※_?????????????????????<CR> IPE8# SFL On RPT All_???<CR> IPE9 6]_?????????<CR> <example2-for ASD-3N/R> IPE0Now Playing iPod_???????<CR> IPE1※ A HARD DAY'S NIGHT._??<CR> IPE2※...
  • Page 40 ※Remote Lock/Panel Lock EVENT PARAMETER function example REMOTE LOCK ON REMOTE CONTROL LOCK ON/OFF SYREMOTE LOCK ON<CR> REMOTE LOCK OFF SYREMOTE LOCK OFF<CR> PANEL LOCK ON PANEL BUTTON(Except MASTER VOL.)CONTROL LOCK ON SYPANEL LOCK ON<CR> PANEL+V LOCK ON SYPANEL+V LOCK ON<CR> PANEL BUTTON &...

This manual is also suitable for:

Avr-2808ci