HP iPAQ rx4200 - Mobile Media Companion Product Information Manual page 18

To synchronize your HP iPAQ and a personal computer using the mini-USB
synchronization cable:
1. Be sure ActiveSync 4.1 or later is installed on your personal computer.
2. Plug the USB end of the synchronization cable into your personal
computer.
3. Connect the mini-USB end on the synchronization cable to the charging/
communications port on your HP iPAQ.
CAUTION To avoid damaging your HP iPAQ or the AC
adapter, check to be sure all connectors are properly aligned
before connecting them.
Synchronization begins automatically.
4. Click Next on the Synchronization Setup Wizard screen.
5. Perform one of the following:
●
By default, the check box is selected to synchronize directly with a
Microsoft Exchange Server. Clear this check box if you do not want
to synchronize directly with a Microsoft Exchange server, and then
click Next.
●
Click Next to synchronize directly with a Microsoft Exchange server.
6. When the Synchronization Options screen displays, select the items
to synchronize between your HP iPAQ and your computer, and then
click Next.
7. After the items have been synchronized, click Finish. The
Synchronization Setup Wizard starts synchronizing the items you
checked.
If ActiveSync does not begin synchronizing, start it manually:
On your personal computer, open ActiveSync by selecting the Start
▲
menu > Programs > Microsoft ActiveSync.
12 HP iPAQ Product Information Guide ENWW