Using Libraries To Insert Parts - Autodesk 057A1-09A111-1001 - AutoCAD LT 2009 User Manual

Using Libraries to Insert Parts

Insert the required part from the library.
To insert a drawing from the library
1 Start the Library. On the command line, enter AMLIBRARY.
2 Double-click the tut_lever.dwg file in the Library.
3 Respond to the prompt as follows:
Specify insertion point:
4 Start the Zoom Window command. On the command line, enter ZOOM.
Respond to the prompts as follows:
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real
time>:
Specify first corner:
Specify opposite corner:
Specify any point in the drawing
Enter window, press ENTER
Specify first corner (1)
Specify opposite corner (2)
Using Libraries to Insert Parts | 101