HP D7171A - NetServer - LPr Manual page 24

Chapter 2
Figure 2-3. Mounting a Pair of PDUs Horizontally (Rear View)
Once you have determined the general location and orientation, install the PDUs
for the rack as described below:
Mounting the PDU Horizontally
Installation Steps
To mount a PDU horizontally, follow these steps:
1. Determine the exact location of the PDU. A PDU is not recommended
behind certain HP units, as shown in Table 2-2. (Horizontally mounted
PDUs conflict with mechanical access if mounted behind these units.)
A PDU can be located in an empty EIA unit and a filler panel put in
the corresponding space in the rack front.
20
Connecting and Routing Cables to the HP NetServer LH 4r