Sanyo PLV-WF20 - 6000 Lumens Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Projector
  5. PLV-WF20 - 6000 Lumens
  6. Manual
Sanyo PLV-WF20 - 6000 Lumens Manual

Sanyo PLV-WF20 - 6000 Lumens Manual

External special command functional specifications
Hide thumbs Also See for PLV-WF20 - 6000 Lumens:
Table of Contents

Advertisement

Quick Links

Download this manual
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PLV-WF20
Ver.1.00
SANYO Electric Co., Ltd
Personal Mobile Group
DI Company
Projector Division

Advertisement

Table of Contents
loading

Related Manuals for Sanyo PLV-WF20 - 6000 Lumens

Summary of Contents for Sanyo PLV-WF20 - 6000 Lumens

  • Page 1 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLV-WF20 Ver.1.00 SANYO Electric Co., Ltd Personal Mobile Group DI Company Projector Division...

  • Page 2: Table Of Contents

    PLV-WF20 Expand Serial Command Functional Specifications CONTENTS 1． Overview ........................8 2． Serial Interface Specification ..................8 2.1 Transfer Specification....................8 2.2 Connection ........................ 8 3． Notes for communication ................... 9 4． Notation........................10 5． Functional Execution Command Table..............11 5.1 Image Command Table ...................
  • Page 3 PLV-WF20 Expand Serial Command Functional Specifications 8.4.11 CF_SHARP Command ..................20 8.4.12 CF_GAMMA Command................... 21 8.4.13 CF_NZRED Command ..................21 8.4.14 CF_PROGV Command ................... 21 8.4.15 CF_IMAGE Command..................22 8.4.16 CF_IMAGEADJ Command ................22 8.5 PC Control Command ..................... 23 8.5.1 CF_FSYNC Command ..................
  • Page 4 PLV-WF20 Expand Serial Command Functional Specifications 8.9.2 CF_DISP Command ..................34 8.9.3 CF_BACKGND Command ................34 8.9.4 CF_LOGO Command..................35 8.9.5 CF_FANSPEED Command ................35 8.9.6 CF_RCODE Command ..................35 8.9.7 CF_RSENS Command ..................36 8.9.8 CF_P-MANE Command ..................36 8.9.9 CF_P-MANETIME Command................
  • Page 5 PLV-WF20 Expand Serial Command Functional Specifications 9.4.14 CR_GAMMA Command .................. 43 9.4.15 CR_NZRED Command..................43 9.4.16 CR_PROGV Command ................... 43 9.4.17 CR_IMAGE Command ..................44 9.4.18 CR_IMGGMD Command................. 44 9.5 PC Status Read Commands ................... 45 9.5.1 CR_FSYNC Command..................45 9.5.2 CR_TDOTS Command..................
  • Page 6 PLV-WF20 Expand Serial Command Functional Specifications 9.8.5 CR_VSCALE Command ................... 54 9.8.6 CR_VPOS Command ..................55 9.8.7 CR_HSCALE Command ................... 55 9.8.8 CR_HPOS Command..................55 9.9 Lamp Status Read Commands................56 9.9.1 CR_LAMPREPL Command ................56 9.9.2 CR_LAMPMODE Command ................56 9.9.3 CR_AUTOLAMPCONTRL Command ...............
  • Page 7 PLV-WF20 Expand Serial Command Functional Specifications 9.11.2 CR_SIGNAL Command................... 64 9.11.3 CR_VMUTE Command..................64 9.11.4 CR_FREEZE Command .................. 64 9.11.5 CR_P-TIMER Command ................. 65 9.11.6 CR_TEMPWARN Command ................65 9.11.7 CR_TEMPFAIL Command................66 9.11.8 CR_SERIALNO Command................66 9.11.9 CR_SHUTCOND Command................66 10．...

  • Page 8: Overview

    PLV-WF20 Expand Serial Command Functional Specifications 1． Overview ・ This Functional Specification defines communication with Network board for PLV-WF20. ・ Commands are designed to communicate with Network board, but most commands are also available to remote-control a projector through RS-232C from a computer. Therefore, commands are defined as Expand Serial Commands.

  • Page 9: Notes For Communication

    PLV-WF20 Expand Serial Command Functional Specifications 3． Notes for communication ・ Expand Serial Command is defined as a single command per line that starts with “C” and ends with carriage return (0x0D). ・ When a projector receives carriage return (0x0D), it starts decoding. ・...

  • Page 10: Notation

    PLV-WF20 Expand Serial Command Functional Specifications 4． Notation ・ Data from a controller to a projector is represented as COMMAND, and data from a projector to a controller in response to the incoming command is represented as RESPONSE. ・ [CR]: Carriage Return Code The command ends with carriage return code.

  • Page 11: Functional Execution Command Table

    PLV-WF20 Expand Serial Command Functional Specifications 5． Functional Execution Command Table 5.1 Image Command Table Execute command Item Set value of Contrast CF_CONT_%1[CR] Set value of Brightness CF_BRIGHT_%1[CR] Set value of Color CF_COLOR_%1[CR] Set value of Tint CF_TINT_%1[CR] Set area to store current values of Color Management CF_COLMNSAV_%1[CR] Set area to load values of Color Management CF_COLMNLD_%1[CR]...

  • Page 12: Screen Command Table

    PLV-WF20 Expand Serial Command Functional Specifications Select System in Video input mode CF_SYSTEM_%1[CR] 5.4 Screen Command Table Execute command Item Select Screen size CF_SCREEN_%1[CR] Cancel Digital Zoom mode CF_DZCENT _%1[CR] Set Keystone correction CF_KEYSTONE _%1[CR] Set Keystone store mode CF_KYSTNMODE _%1 [CR] Set ON/OFF of Ceiling CF_CEIL_%1[CR] Set ON/OFF of Rear...

  • Page 13: Other Command Table

    PLV-WF20 Expand Serial Command Functional Specifications 5.7 Other Command Table Execute command Item Control OPEN / CLOSE of Shutter CF_SHUTTER_%1[CR ] 6． Status Read Command Table 6.1 Image Status Read Command Table Status read command Item Get value of Contrast CR_CONT [CR] Get value of Brightness CR_BRIGHT [CR]...

  • Page 14: Input Status Read Command Table

    PLV-WF20 Expand Serial Command Functional Specifications 6.4 Input Status Read Command Table Status read command Item Get selected Input CR_INPUT [CR] Get selected Source CR_SOURCE [CR] Get selected System in Video Input mode CR_SYSTEM [CR] Get selected source for Input 1 CR_SRCINP1 [CR] Get selected source for Input 2 CR_SRCINP2 [CR]...

  • Page 15: Other Status Read Command Table

    PLV-WF20 Expand Serial Command Functional Specifications Get setting status of Logo Lock CR_LOGOLOCK [CR] Get selected Fan Control Speed CR_FANSPEED [CR] Get selected Remote Control Code CR_RCODE [CR] Get selected location of infrared remote receiver of remote CR_RSENS [CR] control Get setting status of Power management CR_P-MANE [CR] Get setting time for Power Management...

  • Page 16: Error Code Table

    PLV-WF20 Expand Serial Command Functional Specifications 7． Error Code Table Error Code Contents -When the received data cannot be decoded -Parameter designation error (wrong digit number, including invalid value, etc.) Normal reception (This is “Not” error) Specified function is not available in the selected mode Specified value is out of range (Not reflected) Command mismatched to Hardware (the command...

  • Page 17: Functional Execution Command

    PLV-WF20 Expand Serial Command Functional Specifications 8． Functional Execution Command 8.1 Format 1) PC issues a command in the format below: Pattern1: “CF_Command” [CR] Pattern2: “CF_Command_” %1 [CR] CF_: Header Command: String %1: Parameter (String) _: Space (To separate Command and Parameter) 2) The projector decodes the received command and when it gets ready to receive another command, it returns the response.

  • Page 18: Image Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_ CONT Command Command “CF_CONT_%1” [CR] “000-063”--------------- Directly specify setting value of Contrast “UP”--------------------- Increment setting value of Contrast by 1 “DN”--------------------- Decrement setting value of Contrast by 1 Set user controlled value of Contrast. (Available only in the normal Power ON status) Details The value set by this command is not stored in the projector.

  • Page 19: Cf_Colmnav Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.4.5 CF_COLMNAV Command Command “CF_COLMNSAV_%1” [CR] “000 – 009” ---------------- Specify the area to store Store current setting status of Color Management to the area specified in %1. Details (Available only in the normal Power ON status) Acceptable “000”...

  • Page 20: Cf_Wbal- Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.4.9 CF_WBAL- Command Command “CF_WBAL-%1_%2” [CR] “R” ------------- RED “G” ------------ GREEN “B” ------------- BLUE “000-063”------ Directly specify value of Color selected in %1 of White Balance. “UP”------------ Increment setting value of Color specified in %1 of White Balance by 1 “DN”------------ Decrement setting value of Color specified in %1 of White Balance by 1...

  • Page 21: Cf_Gamma Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.4.12 CF_GAMMA Command Command “CF_GAMMA_%1” [CR] “000-015” ---------------- Directly specify setting value of Gamma “UP”---------------------- Increment setting value of Gamma by 1 “DN”---------------------- Decrement setting value of Gamma by 1 Set user controlled value of Gamma. (Available only in the normal Power ON status) Details The value set by this command is not stored in the projector’s memory.

  • Page 22: Cf_Image Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.4.15 CF_IMAGE Command Command “CF_IMAGE__%1” [CR] “STAND” ----------- Standard (Image adjustment value is set to factory default) “REAL” ------------- Real (Fixed value to display graphic image with natural tone) “CINEMA” --------- Cinema (Fixed value to focus on tone reproduction for movie) “CUSTOM1”...

  • Page 23: Pc Control Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.5 PC Control Command 8.5.1 CF_FSYNC Command Command “CF_FSYNC_%1” [CR] “0000-0031” ----------------- Directly specify setting value of Fine Sync “UP” --------------------------- Increment setting value of Fine Sync by 1 “DN” --------------------------- Decrement setting value of Fine Sync by 1 Set value of Fine Sync in PC signal (Available only in the normal Power ON status) The value set by this command is not stored in the projector’s memory.

  • Page 24: Cf_V-Pos Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.5.4 CF_V-POS Command Command “CF_V-POS_%1” [CR] “0000-nnnn” ------------ Directly specify setting value of Vertical Position “nnnn” indicates maximum value, which is current (Total Line – Display Area V) value “UP” --------------------- Increment setting value of Vertical Position by 1 “DN”...

  • Page 25: Cf_Dline Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.5.7 CF_DLINE Command Command “CF_DLINE_%1” [CR] “0100-nnnn” ----------- Directly specify setting value of Display Line “nnnn” indicates maximum value, which is current value of (Total Line - Position V). “UP” ------------------- Increment setting value of Display Line by 1 “DN”...

  • Page 26: Cf_Pcstore Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.5.10 CF_PCSTORE Command Command “CF_PCSTORE_%1” [CR] “MODE1” --------------------------- Store current PC Adjust status to Mode1 “MODE2” --------------------------- Store current PC Adjust status to Mode2 “MODE3” --------------------------- Store current PC Adjust status to Mode3 “MODE4” --------------------------- Store current PC Adjust status to Mode4 “MODE5”...

  • Page 27: Input Control Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command “CF_INPUT_%1” [CR] “1” ---------------------------------- Select Input 1 “2” ---------------------------------- Select Input 2 “3” ---------------------------------- Select Input 3 "4” ---------------------------------- Select Input 4 “UP”-------------------------------- Increment Input No. by 1 “DN”-------------------------------- Decrement Input No.

  • Page 28: Cf_System Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.6.4 CF_SYSTEM Command Command “CF_SYSTEM_%1” [CR] “VGA1” --------------------------- Select VGA1 “VGA2” --------------------------- Select VGA2 “XGA1” --------------------------- Select XGA1 “WXGA3” --------------------- Select WXGA3 “1080I” ------------------------ Select 1080i “1035I” ------------------------ Select 1035i Input is “720p” ------------------------- Select 720p PC Analog “575p”...

  • Page 29: Screen Control Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command “CF_SCREEN_%1” [CR] “NORMAL” ---------------------- Select Normal mode “TRUE” -------------------------- Select True mode “FULL” --------------------------- Select Full mode “CUSTOM” ---------------------- Select Custom mode “DZOOM□UP” ----------------- Expand image size by Digital Zoom “DZOOM□DN”...

  • Page 30: Cf_Keystone Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command “CF_KEYSTONE _%1” [CR] “UP” ------------- Correct Keystone distortion to reduce upper part of image “FUP” ----------- Correct Keystone distortion to reduce upper part “DN” ------------- Correct Keystone distortion to reduce lower part of image “FDN”...

  • Page 31: Cf_Rear Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.7.6 CF_REAR Command Command “CF_REAR_%1” [CR] “ON” --------------------------- Set Rear to ON “OFF” ------------------------- Set Rear to OFF Set/Cancel Rear. (Valid only when in the normal Power ON status.) When Rear is set to ON, image is left/right reversed. Details The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status.

  • Page 32: Cf_Hscale Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.7.9 CF_HSCALE Command Command “CF_HSCALE_%1” [CR] “035” ---------------------- +35 “031” ---------------------- +31 ： “002” ---------------------- +2 “001” ---------------------- +1 “000” ---------------------- ±0 “‐01” ---------------------‐1 “‐02” ---------------------‐2 ： “‐31” ---------------------‐31 “‐32” ---------------------‐32 “UP” --------------------- Increment setting value of Hscale by 1 “DN”...

  • Page 33: Lamp Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPH Command Command “CF_LAMPH_%1” [CR] “RSTn” (n=1-2) --------------------------- Reset lamp 1-2 running time Reset running time of the lamp specified in “n”. Details (Valid only when it is in the normal Power ON status.) Acceptable “000”...

  • Page 34: Setting Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.9 Setting Command 8.9.1 CF_LANG Command Command “CF_LANG_%1” [CR] “ENG” --------------------------- Select ENGLISH “DEU” --------------------------- Select German “FRA” --------------------------- Select French “ITA” ----------------------------- Select Italian “ESP” ---------------------------- Select Spanish “POR” --------------------------- Select Portuguese “NED” --------------------------- Select Dutch “SVE”...

  • Page 35: Cf_Logo Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.9.4 CF_LOGO Command Command “CF_LOGO_%1_%2” [CR] “0000 – 9999” ------------- Directly set Logo PIN code “OFF” ---------------------------Cancel Logo display “DFLT” ------------------------- Select Logo of Factory Default “USER” ------------------------ Select User “UP” ---------------------------- Select functions to choose forward (OFF →...

  • Page 36: Cf_Rsens Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.9.7 CF_RSENS Command Command “CF_RSENS_%1” [CR] “BOTH” -------------------------------- Select both front and back receiver of projector “FRONT” ---------------------------- Select only front receiver of projector “BACK” ------------------------------------ Select only back receiver of projector “UP” --------- Switch forward (BOTH → FRONT → BACK → BOTH) “DN”...

  • Page 37: Cf_Pjpincode Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.9.11 CF_PJPINCODE Command Command “CF_PJPINCODE_%1” [CR] “0000 – 9999” ------------- Directly specify PJ PIN code Enter PIN code to cancel PIN code lock (Available only in the normal Power ON status) PIN code can not be changed. (Only PIN code lock is canceled.) *When PIN code Lock is enabled: PIN code is matched ------------------------- Command is valid (Acceptable) PIN code is mismatched -------------------- Command is invalid (Error code “102”)

  • Page 38: Cf_Filscrl Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.9.15 CF_FILSCRL Command Command “CF_FILSCRL_%1” [CR] “RST” ---------------------- Reset Filter scroll counter Details Reset Filter scroll counter Acceptable Acceptable Response Unacceptable Unacceptable 8.9.16 CF_TESTPAT Command Command “CF_TESTPAT_%1” [CR] “COLOR” ---------------------- Display Color bar “GRAD1” ---------------------- Display 16step(white→black) “GRAD2”...

  • Page 39: Cf_Shutrcprot Command

    PLV-WF20 Expand Serial Command Functional Specifications 8.9.19 CF_SHUTRCPROT Command Command “CF_SHUTRCPROT_%1” [CR] “ON” ------------------ Disable RC key from controlling Shutter (Protection On) “OFF” ----------------- Enable RC key to control Shutter (Protection Off) Set valid / invalid of RC use on Shutter control function Details (Valid only when in the normal Power ON status) Acceptable...

  • Page 40: Status Read Command

    PLV-WF20 Expand Serial Command Functional Specifications 9． Status Read Command 9.1 Format PC issues a command in the format below: “CR_Command” [CR] Command: String When the projector receives the applicable command, it returns the required information as a data string. “000_”...

  • Page 41: Image Status Read Commands

    PLV-WF20 Expand Serial Command Functional Specifications 9.4 Image Status Read Commands 9.4.1 CR_CONT Command Command “CR_CONT” [CR] Details Get user controlled value of Contrast Acceptable “000_%1” [CR] Response “000” – “063” Unacceptable “?” [CR] 9.4.2 CR_BRIGHT Command Command “CR_BRIGHT” [CR] Details Get user controlled value of Brightness Acceptable...

  • Page 42: Cr_Coltemp Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.4.6 CR_COLTEMP Command Command “CR_COLTEMP” [CR] Details Get Color Temperature setting status Acceptable “000_%1” [CR] “000” ~“003” Response “BLANK” ---- OSD Menu is blank (Neither of Xlow / Low / Mid / High) Unacceptable “?”...

  • Page 43: Cr_Offset-B Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.4.12 CR_OFFSET-B Command Command “CR_OFFSET-B” [CR] Details Get user controlled Blue value of Offset Acceptable “000_%1” [CR] Response “000” – “063” Unacceptable “?” [CR] 9.4.13 CR_SHARP Command Command “CR_SHARP” [CR] Details Get user controlled value of Sharpness Acceptable “000_%1”...

  • Page 44: Cr_Image Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.4.17 CR_IMAGE Command Command “CR_IMAGE” [CR] Get image setting status. Details The Required data “CUSTOM1” – “CUSTOM10” corresponds to “Image1” – “Image10” displayed when selecting Image on OSD Menu. Acceptable “000_%1” [CR] “STAND” ---------------------------------- Standard “REAL”...

  • Page 45: Pc Status Read Commands

    PLV-WF20 Expand Serial Command Functional Specifications 9.5 PC Status Read Commands 9.5.1 CR_FSYNC Command Command “CR_FSYNC” [CR] Details Get value of Fine Sync Acceptable “000_%1” [CR] Response “0000” – “0031” “Error Code” [CR] -------------- When command is invalid in the Unacceptable given condition (such as being selected input) “?”...

  • Page 46: Cr_Clamp Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.5.5 CR_CLAMP Command Command “CR_CLAMP” [CR] Details Get value of Clamp Acceptable “000_%1” [CR] “0000” – “ 4095” Response “Error Code” [CR] -------------- When command is invalid in the Unacceptable given condition (such as being selected input) “?”...

  • Page 47: Cr_Setpcadj Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.5.8 CR_SETPCADJ Command Command “CR_SETPCADJ” [CR] Details Get PC signal for current system Acceptable “000_%1” [CR] When input signal is PC Analog; “VGA1” ------------------------ Indicates VGA1 is selected “VGA2” ------------------------ Indicates VGA2 is selected “XGA1”...

  • Page 48: Cr_Pcstore Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.5.10 CR_PCSTORE Command Command “CR_PCSTORE” [CR] Get Free or Stored status of MODE1 - 5 in PC Adjust. Details Data consists of 10 bytes and each byte represents MODE1-10.(F:Free, S:Stored) Acceptable “000_%1” [CR] “FFFFFFFFFF” ---------------- ALL Free “SFFFFFFFFF”...

  • Page 49: Input Read Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.7 Input Read Command 9.7.1 CR_INPUT Command Command “CR_INPUT” [CR] Details Get selected INPUT No. Acceptable “000_%1” [CR] Response “1” – “4” Unacceptable “?” [CR] 9.7.2 CR_SOURCE Command Command “CR_SOURCE” [CR] Details Get selected Source Acceptable “000_%1”...

  • Page 50: Cr_System Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.7.3 CR_SYSTEM Command Command “CR_SYSTEM” [CR] Details Get selected System Acceptable “000_%1” [CR] “VGA1” ------------------------- indicates VGA1 is selected “VGA2” ------------------------- indicates VGA2 is selected “XGA1” ------------------------- indicates XGA1 is selected “WXGA3” ---------------------- indicates WXGA3 is selected “1080I”...

  • Page 51: Cr_Srcinp1 Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.7.4 CR_SRCINP1 Command Command “CR_SRCINP1” [CR] Details Get Source of Input1 Acceptable “000_%1” [CR] “DIGITAL” ---------------------- in Computer mode “ANALOG”“ -------------------- in Computer mode “VIDEO” ------------------------- in Video mode “S-VIDEO” ---------------------- in Video mode “YPBPR”...

  • Page 52: Cr_Nmslot1 Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.7.9 CR_NMSLOT1 Command Command “CR_NMSLOT1” [CR] Details Get the board name inserted to Slot1 Acceptable “000_%1” [CR] “HDCP-DVI2” -------------------- Input1/ New HDCP&DVI board “5BNC-VIDEO”------------------- Input2/ New Video board “VGA” ----------------------------- VGA D-Sub board “NETWORK” -------------------- NETWORK board Response “5BNC”...

  • Page 53: Cr_Idslot2 Command

    PLV-WF20 Expand Serial Command Functional Specifications “00” --------------- Video board Valid Input Source: VIDEO, YC, S-VIDEO “01” --------------- D-sub board Valid Input Source: ANALOG “03” ---------------Network board Valid Input Source: NONE (BLANK) “04” --------------- Component board Valid Input Source: ANALOG, YPBPR “06”...

  • Page 54: Screen Status Read Commands

    PLV-WF20 Expand Serial Command Functional Specifications 9.8 Screen Status Read Commands 9.8.1 CR_SCREEN Command Command “CR_SCREEN” [CR] Details Get currently selected screen image size Acceptable “000_%1” [CR] “NORMAL” ---------------------- Normal mode “ZOOM” -------------------------- Zoom mode “NATURAL” --------------------- Natural wide mode “WIDE”...

  • Page 55: Cr_Vpos Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.8.6 CR_VPOS Command Command “CR_VPOS” [CR] Details Get setting status of V Position Acceptable “000_%1” [CR] Response “-15”－”015” Unacceptable “Error Code” [CR] 9.8.7 CR_HSCALE Command Command “CR_HSCALE” [CR] Details Get setting status of H scale Acceptable “000_%1”...

  • Page 56: Lamp Status Read Commands

    PLV-WF20 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Commands 9.9.1 CR_LAMPREPL Command Command “CR_LAMPREPL” [CR] Details Get the information of Lamp Replacement time Acceptable “000_%1” [CR] “2**” 2 ---------------- indicates 2 lamps are used in this model. * ---------------- indicates the status of each lamp in lamp number order.

  • Page 57: Cr_Inflamp Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.9.5 CR_INFLAMP Command Command “CR_INFLAMP” [CR] Details Get Lamp mode switching status Acceptable “000_%1” [CR] “NML” --------- in Normal status (lamp switching operation is not Response active.) “CNG” ---------- during lamp switching operation Unacceptable “?”...

  • Page 58: Setting Status Read Commands

    PLV-WF20 Expand Serial Command Functional Specifications 9.10 Setting Status Read Commands 9.10.1 CR_BACKGND Command Command “CR_BACKGND” [CR] Details Get setting status of Screen for no signal Acceptable “000_%1” [CR] “BLUE” -------------------------------- Blue Back is selected Response “USER” ------------------------------- User is selected “BLACK”...

  • Page 59: Cr_Rsens Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.10.6 CR_RSENS Command Command “CR_RSENS” [CR] Details Get selected location of infrared remote receiver of remote control Acceptable “000_%1” [CR] “BOTH” --------Select both front and back receiver of projector Response “FRONT” ----- Select only front receiver of projector “BACK”...

  • Page 60: Cr_P-Manetime Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.10.10 CR_P-MANETIME Command Command “CR_P-MAETIME” [CR] Details Get setting time for starting Power Management function Acceptable “000_%1” [CR] Response “001 – 030” ----------------------- 1 to 30 minutes Unacceptable “?” [CR] 9.10.11 CR_FANSPEED Command Command “CR_FANSPEED”...

  • Page 61: Cr_Shuth Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.10.15 CR_SHUTH Command Command “CR_SHUTH” [CR] Details Get time setting to start the shutter management Acceptable “000_%1” [CR] “005” -------------------- 5 minutes “006” -------------------- 6 minutes Response “179” -------------------- 179 minutes “180” -------------------- 180 minutes Unacceptable “?”...

  • Page 62: Cr_Filcond Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.10.20 CR_FILCOND Command Command “CR_FILCOND” [CR] Details Get status of filter clog Acceptable “000_%1” [CR] “CLOG” = Filter is clogged Response “WARN” = Filter is nearly clogged “CLEAN” = Filter is not clogged Unacceptable “Error Code”...

  • Page 63: Cr_Testpat Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.10.24 CR_TESTPAT Command Command “CR_TESTPAT” [CR] Details Get setting status of Test pattern Acceptable “000_%1” [CR] “COLOR” ---------------------- Color bar is displayed “GRAD1” ---------------------- 16step(white→black) is displayed “GRAD2” ---------------------- 16step(white←black) is displayed “GRAD3” ---------------------- 16step(white↓black) is displayed Response “GRAD4”...

  • Page 64: Other Status Read Commands

    PLV-WF20 Expand Serial Command Functional Specifications 9.11 Other Status Read Commands 9.11.1 CR_STATUS Command Command “CR_STATUS” [CR] Get operating status of Projector Details Same as “CR0” in basic command except error code follows it. Acceptable “000_%1” [CR] “00” = Power ON “80”...

  • Page 65: Cr_P-Timer Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.11.5 CR_P-TIMER Command Command “CR_P-TIMER” [CR] Details Get Presentation Timer operating status Acceptable “000_%1” [CR] “ON” ---------------------------- Presentation Timer is ongoing. Response ”STOP” ------------------------ Presentation Timer is paused. “OFF” -------------------------- Presentation Timer is not active. Unacceptable “?”...

  • Page 66: Cr_Tempfail Command

    PLV-WF20 Expand Serial Command Functional Specifications 9.11.7 CR_TEMPFAIL Command Command “CR_TEMPFAIL” [CR] Get the temperature inside the projector when the abnormal status occurs. Details It is possible to get the temperatures for more than one sensor all at once if it is applicable.

  • Page 67: Command With Address Specification

    PLV-WF20 Expand Serial Command Functional Specifications 10． Command with Address Specification 10.1. Overview - Commands with address are used to remote control more than one projector through RS-232C by a computer. - The command with address is defined as a single command per line that starts with “A” and ends with carriage return (0x0D).

  • Page 68: Status Read Command With Address

    PLV-WF20 Expand Serial Command Functional Specifications 10.2.2. When the command pipelining is needed When it needs command pipelining, the operation is the same as the remote control as below: Sending-side system issues commands every 100ms When receiving an applicable command, the function is executed repeatedly for 120ms.

This manual is also suitable for:

Plv-wf20

Table of Contents