Do you have a question about the K350 and is the answer not in the manual?
Questions and answers
Sheila Grimes
January 17, 2025
I purchased n HP - 27" Touch-Screen All-in-One with Adjustable Height - AMD Ryzen 7 - 16GB Memory - 1TB SSD - Jet Black and want to install my Logitech K350 keyboard and mouse but I can't get them to connect.
1 comments:
Mr. Anderson
February 3, 2025
To connect your Logitech K350 keyboard and mouse to an HP 27" Touch-Screen All-in-One:
1. Insert the Logitech Unifying Receiver: Plug the Unifying receiver into a USB port on your HP All-in-One.
2. Power On the Keyboard: Ensure the power switch on the keyboard is in the ON position. The battery LED should light green.
3. Install or Check Batteries: Verify that the keyboard batteries are correctly installed or replace them with two AA alkaline batteries if necessary.
4. Use Logitech Unifying Software: Download and install Logitech Unifying Software on your HP All-in-One. Open the software, follow the on-screen instructions, and pair the keyboard and mouse with the receiver.
5. Check for Interference: Remove any metal objects between the receiver and devices to avoid signal interference.
6. Re-establish Connection (if needed): If the connection doesn't work, use the Unifying Software to reset and reconnect the keyboard and mouse.
The devices should now be ready to use.
This answer is automatically generated
Peter Nordstrom
April 5, 2025
show shift lock on screen
1 comments:
Mr. Anderson
April 5, 2025
To display shift (caps) lock on screen for the Logitech K350, download and install the Logitech software. Once installed, configure it to show an on-screen prompt and optional sound whenever caps lock is turned on or off.
Wireless keyboard and stand allows you to connect up to three devices either via bluetooth smart or via the included pre-paired unifying usb receiver (32 pages)
Need help?
Do you have a question about the K350 and is the answer not in the manual?
Questions and answers
I purchased n HP - 27" Touch-Screen All-in-One with Adjustable Height - AMD Ryzen 7 - 16GB Memory - 1TB SSD - Jet Black and want to install my Logitech K350 keyboard and mouse but I can't get them to connect.
To connect your Logitech K350 keyboard and mouse to an HP 27" Touch-Screen All-in-One:
1. Insert the Logitech Unifying Receiver: Plug the Unifying receiver into a USB port on your HP All-in-One.
2. Power On the Keyboard: Ensure the power switch on the keyboard is in the ON position. The battery LED should light green.
3. Install or Check Batteries: Verify that the keyboard batteries are correctly installed or replace them with two AA alkaline batteries if necessary.
4. Use Logitech Unifying Software: Download and install Logitech Unifying Software on your HP All-in-One. Open the software, follow the on-screen instructions, and pair the keyboard and mouse with the receiver.
5. Check for Interference: Remove any metal objects between the receiver and devices to avoid signal interference.
6. Re-establish Connection (if needed): If the connection doesn't work, use the Unifying Software to reset and reconnect the keyboard and mouse.
The devices should now be ready to use.
This answer is automatically generated
show shift lock on screen
To display shift (caps) lock on screen for the Logitech K350, download and install the Logitech software. Once installed, configure it to show an on-screen prompt and optional sound whenever caps lock is turned on or off.
This answer is automatically generated