Asus Ez Flash 2 - Asus P5G41T-M LX3 User Manual

The ASUS Update utility is capable of updating itself through the Internet. Always update
the utility to avail all its features.
Updating from a BIOS file
Select Update BIOS from a file, then click Next.
a.
b. Locate the BIOS file from the Open window, then click Open.
3. Follow the onscreen instructions to complete the updating process.
2.1.2

ASUS EZ Flash 2

The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Before you start using this utility, download the latest BIOS file from the ASUS website at
www.asus.com.
To update the BIOS using EZ Flash 2:
1. Insert the USB flash disk that contains the latest BIOS file to the USB port, then launch
EZ Flash 2 in any of these two ways:
• Press <Alt> + <F2> during POST.
• Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
press <Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is found.
FLASH TYPE:
BOARD:
VER:
DATE:
PATH:
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
2. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process
and automatically reboots the system when done.
• This function supports USB flash disks with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
2-2
ASUSTek EZ Flash 2 BIOS ROM Utility V3.44
WINBOND W25X/Q80
Current ROM
P5G41T-M LX3
0204 (H:00 B:01)
11/30/2010
A:\
failure!
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Tab] Switch [V] Drive Info
[B] Backup [ESC] Exit
Chapter 2: BIOS information