HP D5970A - NetServer - LCII Manual page 52

Chapter 3
Verify SCSI B Channel Control
4. When the Setup Utility menu is displayed, look for the following items:
Integrated HP NetRAID
Included SCSI_A Channel [
Included SCSI_B Channel [
Read the values in the brackets to determine whether the integrated HP
NetRAID controller is enabled, and for which SCSI channels.
To verify the factory default settings, see that all of the following are
true:
Integrated HP NetRAID is set to "Enabled."
Included SCSI_A Channel is set to "Yes."
Included SCSI_B Channel is set to "No."
To disable the integrated HP NetRAID controller: Use the up and
down arrow keys to highlight "Integrated HP NetRAID." Then use the
+/- keys to disable it. This disables the integrated HP NetRAID
controller for both SCSI channels.
To exclude the SCSI A Channel from the integrated HP NetRAID
controller: Use the up and down arrow keys to highlight "Included
SCSI_A Channel." Then use the +/- keys to change the value to "No."
To exclude the SCSI B Channel from the integrated HP NetRAID
controller: Use the up and down arrow keys to highlight "Included
SCSI_B Channel." Then use the +/- keys to change the value to "No."
NOTE
Write your settings here for future reference:
Verify Boot Order
5. Press the right arrow key twice to select the Configuration menu.
48
[
Integrated HP NetRAID [
Included SCSI_A Channel [
Included SCSI_B Channel [
Configure Mass Storage
]
]
]
]
]
]