HP D5970A - NetServer - LCII Configuration Manual page 5

Microsoft cluster installation documentation
Hide thumbs Also See for D5970A - NetServer - LCII:
Table of Contents

Advertisement

No. of cabinets
Disk modules:
Power supply
SureStore E Manager
Cabling
Terminator
LANs
LAN connection
NIC:
Model
Driver
No. of NICs
SPU I\O slot
1 – 6; Maximum 2 SureStore E 12Hs per SCSI bus.
HP A3702A 4.2 GB Disk Module;
HP A3703A 9.1 GB Disk Module;
HP A3710A 18.2 GB Disk Module.
3
3.0 or later.
HP C2981A 0.5 meter Ultra-flexible SCSI Cable;
HP C2911A 0.9 meter 68-pin HD Male to 68-pin HD Male Cable;
HP C2924A 2.5 meter 68-pin HD Male to 68-pin HD Male Cable;
HP C2925A 10 meter 68-pin HD Male to 68-pin HD Male Cable.
Maximum 25 meters per SCSI bus.
HP C2905A Wide Differential SCSI Terminator.
Intra-cluster (Heartbeat) LAN
HP D5954A crossover cable or any
equivalent.
The intra-cluster LAN may only be
used for cluster node
communication via a crossover
cable. It may not be used for client
communication.
HP D5013A (10/100TX PCI)
3.00.06.004 or later
1
P2
3
Client LAN
Any LAN
Any that is on both the HP
Tested Products List and the
Microsoft Hardware
Compatibility List.
Any driver
If the NIC used is the same as
the Intra-cluster LAN, then the
Client LAN must use the same
driver as the Intra-cluster LAN.
1 minimum
P1

Advertisement

Table of Contents
loading

Table of Contents