HP D5970A - NetServer - LCII Configuration Manual page 4

Navigator version
Operating System
Service pack
SPU
Model
Clock speed
No. of CPUs
BIOS version
CPU cache
RAM
No. of power supplies
Local storage
I/O slots:
Storage
Local
Controller
Cabinets (Physical drive
location)
Disk drives (hot swap
or fixed)
SCSI IDs
Shared
Host Bus Adapter
Model
No. of HBAs
Driver
SPU I/O slot
SCSI ID
Disk Array Controller
Model
No. of controllers
Firmware
RAID level (internal)
Logical disks
Hot spare
SCSI ID
Disk Array Storage
Model
L.15.00 or later
Microsoft Windows NT Server 4.0, Enterprise Edition or later
SP4 or later
HP NetServer LH 4
400 or 450 MHz.
2 - 4
4.06.12 PS
Any size
256 MB minimum. Must be HP.
3 or 4
Internal or external. See
P6, P7, P8 - Shared storage controller
P2 – Intra-cluster (Heartbeat) LAN
P1 – Client LAN
P3-P5 - Local storage controller or any other plug-in cards.
Use embedded RAID, otherwise any manufacturer or driver in any
available I/O slot.
SPU internal drive
Must be HP.
Any
HP A5252B Wide Differential SCSI Adapter.
1 – 3 per NetServer.
"Adaptec AHA-294X/AHA-394X/AIC-78XX SCSI Controller"
driver in NT 4.0 SP4 or later
st
P8 (1 HBA), P7 (2
7
HP A3706A Model 12H 96MB Controller with SureStore E 12H
2 per SureStore E 12H
HP54 or later.
1/0 and 5
Logical units within each array must be numbered from 0 – 7.
Active Hot Spare.
0 – 6, or 8 – 15
HP A3700AB SureStore E 12H Disk Array
2
Local Storage below.
nd rd
HBA), P6 (3 HBA)