HP D5970A - NetServer - LCII User Manual page 63

Chapter 6
4. Insert the new battery with the positive sign (+) facing out, and ensure
that it is seated completely. Make sure that the retaining clip is in place,
and holds the battery firmly.
5. Replace the top cover and the front bezel, and reconnect the power cord.
6. Secure the auxiliary battery.
7. Remove the old battery, which is shown in Figure 6-2.
8. Replace the top cover and the front bezel, and reconnect the power cord.
Figure 6-2. Battery on System Board
Troubleshooting
57