Audio
Your computer enables you to use a variety of audio features:
●
Play music using your computer speakers and/or connected external speakers
●
Record sound using the internal microphones or connect an external microphone
●
Download music from the Internet
●
Create multimedia presentations using audio and images
●
Transmit sound and images with instant messaging programs
●
Stream radio programs (select models only) or receive FM radio signals
●
Create or "burn" audio CDs
Connecting external audio devices
WARNING!
earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety and
Environmental Notices. These notices are located in Help and Support.
To connect external devices such as external speakers, headphone, or a microphone, refer to the
information provided with the device. For best results, remember the following tips:
●
Be sure that the device cable is securely connected to the correct jack on your computer. (Cable
connectors are normally color-coded to match the corresponding jacks on the computer.)
●
Be sure to install any drivers required by the external device.
NOTE:
programs that use the device.
Checking your audio functions
To check the system sound on your computer, follow these steps:
1.
Select Start > Control Panel.
2.
Click Hardware and Sound.
3.
Click Sound.
4.
When the Sound window opens, click the Sounds tab. Under Program, select any sound event,
such as a beep or alarm, and click the Test button.
You should hear sound through the speakers or through connected headphones.
To check the record functions of the computer, follow these steps:
1.
Select Start > All Programs > Accessories > Sound Recorder.
2.
Click Start Recording and speak into the microphone. Save the file to the desktop.
3.
Open Windows Media Player and play back the sound.
48
Chapter 4 Multimedia
To reduce the risk of personal injury, adjust the volume before putting on headphones,
A driver is a required program that acts like a translator between the device and the
Need help?
Do you have a question about the ProBook 6450b - Notebook PC and is the answer not in the manual?
Questions and answers
wifi is not active
To activate WiFi on the HP ProBook 6450b Notebook PC, follow these steps:
1. Click the Show hidden icons icon (the arrow at the left of the notification area) and position the cursor over the wireless icon to check the state of the wireless device.
2. If the wireless icon is not displayed, open Windows Mobility Center:
- Select Start > Control Panel > Hardware and Sound > Windows Mobility Center.
- Click the wireless icon in the Wireless Assistant tile.
3. Click Properties.
4. Select the checkbox next to HP Wireless Assistant icon in notification area.
5. Click Apply, then Close.
For further details, you can access the Wireless Assistant software Help by clicking the wireless icon in Windows Mobility Center and then clicking the Help button.
This answer is automatically generated