HP Color LaserJet 5500 Technical Reference Manual page 49

80 significant characters. The job name variable is a
string and must be enclosed in double quotes, as shown
in the command syntax. If the NAME option is included,
the unsolicited job status includes the job name (if
unsolicited job status is enabled).
START = first page — The command option START is
used to provide a non-printing mode for skipping to a
selected portion of the job. It indicates the first page that is
printed. If the START option is omitted, the printer starts
printing at the beginning of the job. If the end of the job
comes before the START page, no pages are printed.
END = last page — The command option END
indicates the page number of the last page to be printed.
The last page variable is relative to page 1 of the print
job. If the END variable is omitted, the printer prints to
the end of the job. If the end of the job is encountered
before the START page, no pages are printed. If the end
of job is encountered before the END page, printing
terminates. Additionally, if the START page is greater
than the END page, no pages are printed.
PASSWORD = number — The command option
PASSWORD allows the application to modify the
NVRAM variables if the password matches the active
password variable. (Using PJL, the NVRAM variables
are modified using either the DEFAULT or INITIALIZE
commands; some printer language commands may also
modify NVRAM variables.) Passwords are set using the
DEFAULT command. The default password value is 0,
which indicates PJL security is disabled—any job can
modify printer feature settings using the DEFAULT or
INITIALIZE commands. If any other password value is
active, PJL jobs must issue the correct password value or
they are disabled from using the DEFAULT or
INITIALIZE commands. (See the "PJL Security" section
at the end of this chapter.)
DISPLAY="display text " — The command option
DISPLAY is used to display a job message on the control
panel display. The message is displayed when the printer
begins to work on this job and is removed when the last
Job Separation Commands 5-3