Install Cd-Rom Drivers On A Dos Bootable Hard Disk - HP Tc2110 - Server - 128 MB RAM Installation And Configuration Manual

Chapter 5

Install CD-ROM Drivers on a DOS Bootable Hard Disk

The following systems files should be modified:
·
config.sys
·
autoexec.bat
1. Copy the files aspi8u2.sys and aspicd.sys from the DOS directory of the Ultra3
Family Manager Set disk to your C:\ drive. At the DOS prompt, type the
following lines and press Enter after each line:
mkdir c:\scsi
copy a:\dos\*.* c:\scsi
2. Modify config.sys for loading aspi8u2.sys and aspicd.sys, which is necessary
for connecting a CD-ROM. Either create this file in C:\ if you do not currently
have a config.sys, or add these lines to the existing config.sys file. Note that you
may need to change the path for the drivers.
device=c:\scsi\aspi8u2.sys /d
device=c:\scsi\aspicd.sys /d:aspicd0
3. Modify autoexec.bat for loading mscdex.exe. Either create this file in C:\ if you
do not currently have autoexec.bat, or add these lines to the existing
autoexec.bat file:
c:\dos\mscdex.exe /d:aspicd0 /m:12
NOTE
4. Reboot your system. You are now able to access your CD-ROM drive from the
command line and from Windows.
This will assign the CD-ROM to the next available drive
letter, typically D:\ if there is only one DOS drive. If you are
using MS-DOS 5.0 and do not already have mscdex.exe, you
will need to either upgrade to MS-DOS 6.0 or above, or
download mscdex.exe from Microsoft BBS or CompuServe
forum.
Novell NetWare Installation
45