4.
To exit the Computer Setup (F10) Utility:
a.
b.
5.
To close the remote console session:
a.
b.
Reviewing Activity of a Blade PC
NOTE:
This task can only be performed for a given blade PC bay by enclosure administrators,
group administrators, and group members with access rights to the blade PC bay.
Web-Based Interface
To access the console log for a blade PC using the Web-based user interface:
1.
Click the Bays tab.
2.
Click Bay List in the left panel.
3.
Select the bay from the bay list.
4.
Click Console Log under Bay Information.
Command Line Interface
To view the system log for a blade PC using the command line interface, type:
SHOW SYSLOG BAY <bay number>
NOTE:
Pressing the letter
more information is available to display. The system log of the blade PC is not stored between
reboots, so the information only includes what has taken place since the last power-on of the
Integrated Administrator.
Powering Off the Blade PC
CAUTION:
Auxiliary power from the blade PC and ends all open sessions.
Web-Based Interface
To reboot or power off the blade PC using the Web-based user interface:
1.
Click the Bays tab.
2.
Click Bay List in the left panel.
3.
Click the blade PC you wish to reboot or power off.
4.
Click Virtual Buttons at the bottom of the screen.
66
Chapter 7 Troubleshooting
Press Esc.
When prompted to press F10, press
Press
Ctrl_
(control underscore).
Press D.
q
quits the command. Pressing any other key shows the next screen, if
Rebooting or powering off the blade PC removes all power with the exception of
Esc
then
0
(zero) to confirm.