Before Installing Or Upgrading To Windows Me - Lenovo ThinkPad i Series 1200 Installation Manual

Before Installing or Upgrading to Windows Me

Before proceeding further into the guide, review what steps should be completed before, while,
and after installation or upgrading to Windows Me. Use the following chart as a quick reference
when preparing to upgrade to Windows Me:
START
Preparation
"Update"
computer
Pre-setup
Installing or
upgrading to
Windows Me
Clean Install
Read this document and the Windows Me Release Notes for Setup (\Win
9x\Setup.txt)
Determine if your ThinkPad computer meets all the minimum hardware
requirements for running Windows Me.
Review the Hardware Compatibility List (HCL) to determine if your
hardware is supported while running Windows Me.
Decide to clean install or upgrade install Windows Me.
Back-up all data files and information on the computer before starting
clean install or upgrading.
Undock and remove any optional devices.
Build the System Program Service (BIOS) Diskette and update the
system BIOS and initialize the BIOS setting to default.
Download appropriate drivers required from IBM Web site
Install at least 32 megabytes (MB) of system memory on your ThinkPad
computer.
Create Startup Diskette.
Partition and format the Hard
Disk.
Install Windows Me using the
Startup Disk.
Upgrade Install
Verify space on hard disk drive
o Refer to setuptip.txt,
depending on your
system configuration
for minimum hard disk
space.
Uninstall all unsupported
applications and utilities.
ThinkPad 600, 600E, upgrade
ThinkPad ACP Modem
included in the Windows Me
CD
Upgrade to Windows Me