No Subtitle On Dvd After Resuming From Standby Mode With Some Dvd Movies; Device Configuration And Setup; Crystal Soundfusion Joystick' Device Will Be Marked With A Yellow "!" In The Device Manager When Docked; Two Infrared Communication Device Will Appear After Upgrade If The Infrared Device Is Not Enabled - Lenovo ThinkPad i Series 1200 Installation Manual

4.9 No subtitle on DVD after resuming from Standby mode with some DVD
movies
Models:
Issue:
Cause:
Resolution:
5

Device Configuration and Setup

5.1 "Crystal SoundFusion Joystick' device will be marked with a yellow "!" in the
Device Manager when docked.
Models:
Issue:
Cause:
Resolution:
5.2 Two Infrared Communication Device will appear after upgrade if the Infrared
device is not enabled.
Models:
Issue:
Cause:
Resolution:
All ThinkPad models
If system enters Standby mode while DVD is playing, after resuming
from Standby mode, the subtitle, if available, is not displayed. This
varies from DVD to DVD title.
This is Windows Me problem. This also occurs in Windows 98.
Enable subtitle and play again, or do not use Power Management
while playing the DVD.
ThinkPad 600 Series
If the system is docked to SelectaDock-III docking station, the
"Crystal SoundFusion Joystick" device will be marked with a "!"
point in the Device Manager. When the system is docked to Selecta
Dock II, than GamePort Joystick has yellow "!".
By Windows Me design. There is only one game port resource
available to the system. When the computer is docked, the system
BIOS configures this resource to the game port device located on the
docking station rather than the one on the system-unit.
Disable the 'Crystal SoundFusion' in the Device Manager and the
device can be still attached to the game port device to the docking
station. To disable the 'Crystal SoundFusion' follow the steps below:
1. Click Start
2. Double-click System icon and click 'Device Manager' tab
3. Click [+] Sound, video and game controllers and double-click
Crystal SoundFusion
4. Click [Disable]
5. Click [OK]
ThinkPad 600E (266/300MHz)
Two Infrared Communication Device will appear after upgrade if the
Infrared device is not enabled.
Infrared Communication device is disabled by BIOS default. If the
system is upgraded while Infrared is disabled, two Infrared
communication devices will appear after the upgrade. It does not
cause any functionality loss.
Prior to upgrade, enable ThinkPad Infrared Device
1. Click Start → Settings → Control Panel
2. Double-click System icon
Settings Control Panel