Error Messages; No Beep Symptoms - Acer 710TE - Extensa - PII 233 MHz Service Manual

Numeric error Codes
Symptom / Error
02F5
DMA Test Failed
02F6
Software NMI Failed
02F7
Fail-Safe Timer NMI Failed

Error Messages

Symptom / Error
Device Address Conflict
Allocation Error for: device
Failing Bits: nnnn
Fixed Disk n
Invalid System Configuration
Data
I/O device IRQ conflict
Operating system not found

No Beep Symptoms

Symptom / Error
No beep, power-on
indicator on, and a blank
LCD not POST
4-10
Spare Part / Action in Sequence
1. DIMM
2. IMM (CPU board)
3. Main board
1. DIMM
2. IMM (CPU board)
3. Main board
1. DIMM
2. IMM (CPU board)
3. Main board
Spare Part / Action in Sequence
1. Run "Load Setup Defaults" in BIOS Setup Utility.
2. Backup battery (RTC)
3. Main board
1. Run "Load Setup Defaults" in BIOS Setup Utility.
2. Backup battery (RTC)
3. Main board
1. DIMM
2. BIOS ROM
3. Main board
1. None
1. BIOS ROM
2. Main board
1. Run "Load Setup Defaults" in BIOS Setup Utility.
2. Backup battery (RTC)
3. Main board
1. Enter Setup and see if fixed disk and drive A: are
properly identified.
2. Diskette Driver
3. Hard Disk
4. Main board
Spare Part / Action in Sequence
1. Ensure every connector correctly
2. DIMM
3. Reseat IMM (CPU board)
4. IMM (CPU board)
5. Main board
EXTENSA 700/710 Service Guide