HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 91

Scan
menu item is missing from the Home page.
Problem: On the Home page of my embedded web server the
missing from the left column.
Resolution 1: Only HP multifunction (MFP or All-in-One) devices can be
used for scanning; check the type of printer attached to the print server.
Resolution 2: Web Scan has been disabled on the print server that networks
the multifunction printer. Someone with configuration access to the print
server should check the configuration of the
Email To...
button is missing from the Scan page.
Problem: I can reach the Scan page but no
Scan
.
Resolution: Scanning to email has been disabled on the print server that
networks the multifunction printer. Someone with configuration access to the
print server should check the configuration of settings of the
Scan-to-email
Email To...
be set for the
Email To...
The
Problem 1: The
error message says "
specified
". This means that no outgoing SMTP mail server was detected as
configured for the print server.
Resolution 1: Someone with configuration access to the print server should
configure the e-mail server, as follows: Click on the
of the embedded web server page. In the left column of the page (in the
Configuration
Server (for outgoing mail)
user scans to email through this networked scanner. Click
Back to start of troubleshooting web scanning
Back to start of Web Scan information
Disabling Web Scan and its alternative
You can disable and enable the availability of the web scanning facility in the
embedded web server. You can also disable and enable the alternative to this basic
scanning functionality.
The alternative: The print server may support (depending on installation methods)
the full-function scanning facility residing on individual computers—acquired by
installing the client software from the CD for the HP multifunction (MFP or
All-in-One) device. The client user can use that software normally on printers
networked through an HP Jetdirect print server, and it probably has more features
than the simple scanning available available on the embedded web server through the
client user's browser.
Enable Web Scan
parameter. Both
button to appear.
button is available but I get an error message.
Email To...
button is available but the operation fails and an
To use this feature, Email (SMTP Server) must be
Other Settings
list), select
, specify the e-mail server to be used when any
Scan
Enable Web Scan
Email To...
button appears next to
Enable Web
Scan-to-email
and
Networking
Email (SMTP)
. For the parameter
[Apply]
item is
parameter.
must
tab at the top
.