Table of Contents
Advertisement
Chapter 4
Management and Configuration
Step 1
Upgrade to the new version of the software.
Step 2
Select the version of the software to run next time the unit is restarted.
Step 3
Restart the Cisco VG30D Voice Gateway unit. The configuration that is stored on the unit automatically
gets loaded into the new version of software.
Step 4
Perform a Back Up Configuration as described in the
is compatible with the newly activated software gets produced.
You cannot restore a backed-up configuration file to a system that is running a different version of
Note
software to that under which the backup file was saved.
Note
Cisco Systems, Inc., recommends that each backup configuration file be given a unique name that
includes the software release number. This will ensure that, if the configuration backup files are stored
in a central location, a new backup file does not overwrite an existing file that may be required for a
different location.
Software Selection
The Cisco VG30D Voice Gateway comes supplied with an embedded default operational software.
Software Selection provides a choice between using the new software downloaded or the embedded
default software that is supplied with the Cisco VG30D Voice Gateway.
Reboot the Cisco VG30D Voice Gateway
Selecting Reboot the Cisco VG30D Voice Gateway will, after confirming the action, immediately halt
and restart the Cisco VG30D Voice Gateway.
Note
Be aware that this action is service affecting. Calls in progress will get lost and service will be
interrupted until the Cisco VG30D Voice Gateway is fully operational again.
OL-19276-01
Gateway
section. A configuration backup file that
Cisco VG30D Voice Gateway User Guide
Administration
4-13
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VG30D and is the answer not in the manual?
Questions and answers