Attaching The Port Replicator - Fujitsu S6520 - LifeBook - Core 2 Duo 2.4 GHz User Manual

ATTACHING THE PORT REPLICATOR

The port replicator can be attached to your notebook while
the power is on, while in suspend mode, or while the power
is off.
Installing a Fujitsu LifeBook S7000 notebook:
1. Unplug the AC adapter from the system if it is connected
and any other connectors that are attached to the back
of the system.
2. To make the alignment bar vertical for a LifeBook S7000
notebook, slide the alignment bar release latch forward
until the alignment bar springs to a vertical position.
(Figure 3)
3. Position the system so that the right side is aligned with
the right stop. (Figure 4)
The AC adapter must be plugged into
■
the port replicator in order to use all of
the ports. If the adapter is connected to
the system, several of the ports on the
port replicator will not be usable.
■ The port replicator is designed to be used
with a variety of system configurations.
Depending upon the model, the align-
ment bar will need to be either vertical or
horizontal.
If you have a LifeBook S7000 notebook,
you will need to put the alignment bar
into vertical position; if you have a Life-
Book E8000 notebook, the alignment bar
should be in horizontal position.
7