Fujitsu Lifebook S6520 Getting Started

This convenient guide will lead you through the start-up
process and will also offer some valuable tips.
What's in the Box
Check to see that all of the following items are in the box:
❏ LifeBook notebook ❏ Drivers and Applications Restore DVD
❏ Lithium ion battery, pre-installed ❏ Microsoft
® associated material
❏ AC adapter with power cord ❏ Recovery and Utility Disc
❏ Weight saver module
Depending upon your confi guration, the following items may also be shipped with your notebook:
❏ Dual-Layer Multi-Format ❏ Additional Lithium ion battery
❏ DVD and/or CD-RW application CD ❏ Modular Bay Battery
Microphone
Web Camera
Controls, Connectors,
and Access Points
Stereo Speaker
Fingerprint Sensor
Touchpad Pointing Device
Wireless LAN/Bluetooth
On/Off Switch
IEEE 1394 Jack
Headphone Jack
S-Video Out Jack
Microphone Jack
Display Panel Latch Button Status Indicator Panel
RIGHT PANEL BACK PANEL
Anti-Theft Lock Slot
USB Ports Air Vents USB Port
Anti-Theft Lock Slot
Modem Jack Optical Drive Release Button
Flexible Bay (shown with Optical Drive installed)
LEFT PANEL BOTTOM PANEL
LAN (RJ-45) Jack PC Card Eject Button
DC-In Jack Air Vents PC Card Slot
Flexible Bay
Device Lock
Memory Upgrade
Compartment
Infrared Port
External Video
Air Vents (multiple
Port
locations)
Memory Stick/SD/xD Card Slot
Initial Start Up
Display Panel
Latch Button
DC Power
Jack
Microphone
Display Panel
LifeBook Security/Application
Panel
Power/Suspend/Resume
Button
Status Indicator Panel
LAN Jack
Stereo Speaker
Keyboard
WLAN
Switch
Lithium ion Battery Bay
Battery
Release
Latches
* Removable If you have a:
Dust Filter
Webcam
Dual-Layer Multi-Format
DVD Writer
* Should be cleaned periodically
1. Open the Display Panel
• Ensure that your LifeBook is on a hard level surface and that
the air vents are not blocked.
• Press latch button and lift the display, being careful not to
touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
• Plug the AC adapter into your notebook.
• Plug the power cord into the AC adapter.
• Connect the power cord to an electrical outlet.
3. Connect to Internet or Network
• Connect either a phone cord to the modem jack or an Ethernet
cable to the LAN jack on your notebook and to a wall jack
or to an Ethernet router.
4. Booting the System
Important:
AC Adapter
• During the setup procedure, do not disconnect the power supply,
press any buttons, or use any peripheral devices such as a
mouse, keyboard, or remote control.
• You should not attach any external devices and do not put a DVD/CD in
your drive until you have gone through the initial power on sequence.
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
• Press the Suspend/Resume/Power button (above the keyboard) to
turn on the notebook. When you do this for the fi rst time, it will display
a Fujitsu logo on the screen. If you do nothing the system will load
Telephone
the operating system, and then the Windows Welcome will begin.
Jack
5. Register
For Genuine Microsoft ® Windows ® XP:
• After the operating system has initialized, enter the information
as prompted to personalize your notebook and confi gure your
modem to dial.
For Genuine Windows Vista®:
• Accept the Microsoft ® Windows ® Licensing Agreement and the
Fujitsu End User License Agreement to proceed.
• Select your User ID and Password during the "Welcome Screen."
• Keep a record of your User ID and password stored in a secure place.
• THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.
• Do not attempt to turn power on or off during this stage.
6. Registering Your LifeBook notebook
• Register your notebook with Fujitsu Service and Support via our
Power/Suspend/Resume website at us.fujitsu.com/computers.
Button • You will need to be set up with an Internet Service Provider (ISP)
to register online.
7. Installing Click Me!
• Check to be sure the WLAN switch is on.
For Genuine Microsoft ® Windows ® XP: The fi rst time you boot up
your system, you will see an icon called Click Me! in the Start menu.
For Genuine Windows Vista®: In addition to an icon on the
desktop, a dialog box will automatically open that prompts you
to run Click Me!. If you choose not run ClickMe! at this time,
the ClickMe! icon will appear on your desktop.
• When you click the Click Me! icon, your system will automatically
build the icon tray in the bottom right of the screen. These icons
You will need to install
provide links to utilities that you will frequently access.
the following software:
(For Additional Utilities)
Arcsoft WebCam
Companion
CyberLink PowerProducer
CLICK ME
"Click Me!"
8. Install Additional Software
• Close any open programs, applications or utilities
• Insert software application CD into media drive.
• Open the application folder, select the set-up icon,
and load desired software, as shown in the table.
• Restart your computer.
9. Access your User's Guide
• To take advantage of all the features of your new Fujitsu LifeBook
notebook, it is highly recommended that you read your electronic
User's Guide. It contains important detailed information about
your new computer. You can access your User's Guide by
selecting its icon from the screen desktop.
• The Fujitsu Installer should automatically launch. If it doesn't, you will
need to fi nd the Setup.exe fi le on the Recovery CD's root folder.
• If you are using Genuine Windows Vista®, Click [Allow] in the
User Account Control (UAC) box.
• Click [Continue]
• Select "I Agree" and click [Continue] in the License Agreement box.
• Select "User's Guide" from the "Utilities/Applications" category.
• Click [Install Selected Subsystems]
• The User's Guide will be copied to your hard drive in the
C:\Fujitsu\Manual directory. Shortcuts to the User's Guide
will be placed on your desktop and in the Start menu.
Common Indicators
Status Display Panels
The Status Display Panels are located above and below the
keyboard as shown. Following are some common indicators.
Power Indicator
The Power indicator symbol shows whether
your system is operational. It has several
different states, each of which tells you
the mode your notebook is in.
Battery Level Indicators
Steady On: This means that there is power
Note that there are indicators for the primary
to your notebook and that it is ready for use.
battery (Battery 1) and an optional second
Flashing: This means that your notebook battery (Battery 2).
is in Standby mode.
The Battery Level indicators display the charge
Steady Off: This means that your system is level of the indicated battery pack, as follows:
either in Hibernate mode, or that your
Green, solid: Battery is between 51%
notebook has been turned off.
and 100% charged.
If you are charging your battery, the Power
Orange, solid: Battery is between 13%
indicator will remain on even if your notebook
and 50% charged.
is shut off.
Red, solid: Battery is 12% or less charged.
AC Adapter Indicator
Orange, blinking: Blinks during battery status
The AC Adapter indicator states whether your
measurement (Four seconds after the
notebook is operating from the AC adapter,
battery is installed).
Auto/Airline adapter or battery. This icon has
Red, blinking: There is a problem with the battery.
two different states that can tell you what
power source your notebook is using. Off: There is no battery installed, the
battery has no charge, or the system
On: This means that either of the adapters
has been turned off.
are currently in use.
Hard Drive/Optical Drive Access
Off: Power is only coming from the battery and
Indicator
you do not have an adapter connected.
The Hard Drive/Optical Drive Access indicator
Battery Charge Indicators
glows green when your internal hard drive is
Note that there are indicators for the primary
being accessed. Note that fl ickering is normal.
battery (Battery 1) and an optional second
NumLk Indicator
battery (Battery 2).
The NumLk indicator states that the integral
Orange, solid: Battery is available and system
keyboard is set in ten-key numeric
is charging.
keypad mode.
Green, solid: Battery is available and system
CapsLock Indicator
is fully charged.
The CapsLock indicator states that your
Orange, blinking: Battery is available and
keyboard is set to type in all capital letters.
waiting to charge battery (battery is out
ScrLk Indicator
of thermal range).
The ScrLk indicator states that your scroll
Off: AC adapter is not plugged in. lock is active.
Quick Tips
It takes approximately 4 hours to
charge a fully discharged single
battery with unit off or in
suspend mode.
Optimizing Battery Life
• Set power management setting
to Maximize Battery Life.
• Adjust display brightness levels
to lowest comfortable setting.
• Remove PC Card when
not needed.
• Utilize Suspend mode when
not using your notebook.
• Read the Power Management
section in your electronic User's
Guide for additional features.
Adjusting Display Brightness
• Fn + F6 to decrease brightness
• Fn + F7 to increase brightness
Adjusting Volume
• Fn + F8 to decrease volume
• Fn + F9 to increase volume
* Mono microphone jack or stereo
microphone/line in jack depending
on confi guration.
* * Stereo headphone/Optical Digital
Audio out jack or stereo head-
phone/Line Out/Optical Digital
Audio out jack.
Drivers
Look for the latest drivers on the
Drivers and Applications Restore
CD. Right-click the FDU icon and
select "update", or download
them at us.fujitsu.com/computers.
(For Latest Drivers)
(FDU)