Preparing The Camera For Bluetooth Connection - JVC GZ-HM960BUS Instructions Manual

Preparing the Camera for Bluetooth connection

Mutual registration (pairing) between your camcorder and smartphone is
required for their Bluetooth connection before using the application.
Note
· Refer also to the manuals of your smartphone and camcorder for pairing.
1
Activate the Bluetooth function of the smartphone.
• When using Blackberry
1
Press the menu key.
2
Select [Manage Connections].
3
Select [Bluetooth] and tick the checkbox.
• When using Touch Pro/Touch Diamond
1
Select [Start] - [Settings].
2
Open [Connection] tab and select [Bluetooth].
3
Open [Mode] tab and tick [Turn on Bluetooth] and [Make
this device visible to other devices] checkboxes.
• When using HD2
1
Tap [Start] - [Settings].
2
Tap [Menu] - [All Settings] - [Bluetooth].
3
When prompted to turn on Bluetooth, tap [Yes].
4
Tap the settings tab (
on the drop-down menu at [
5
Tap [Done].
The smartphone gets ready for connection and becomes detectable for
other equipment.
Preparing the Camera for Bluetooth connection
) and then tap [Always Visible]
].
6