JVC GZ-HM960BUS Instructions Manual page 11

3
Enter the pass key on the camcorder.
• When using BlackBerry/Touch Pro/Touch Diamond
Enter a 4 digit number you like ( "0000", for example).
3-1
Enter the passkey for the device to register.
3-2
Tap [SET] after entering all digits.
After entering it, the camcorder waits for authentication of the
smartphone.
• When using HD2
Entering the pass key is not required. Wait until the message
"REGISTERED" appears on the "DEVICE REGISTRATION" screen.
4
Enter the pass key on the smartphone.
• When using BlackBerry/Touch Pro/Touch Diamond
Enter the same pass key you entered in Step 3.
Pairing is finished.
• When using HD2
If you use HD2, entering the pass key is not required. Tap [Yes] when the
message [Allow this pairing?] appears.
Preparing the Camera for Bluetooth connection
10