❏ Remote Channels
When you select the REMOTE LAYER button in the Master window, Remote Channels
are displayed.
A
Channel number
This is the channel number. Double-click the channel number to open the Selected
Channel window.
B
[SELECT] button
This button is used to select the Remote Channel.
C
[ON] button
This button turns the Remote Channel on and off. It appears orange while the chan-
nel is on.
Note:
use the [ON] buttons and channel faders to control the functions specified on the
Remote page.
D
Remote target name
A
This name indicates the remote target assigned on the 01V96.
E
Channel fader
This is the Bus Out's fader.
Note:
use the [ON] buttons and channel faders to control the functions specified on the
Remote page.
F
Fader value indicator
This indicator indicates the fader position in the range of 0 through 127.
B
If the remote target is set to User Assignable Layer:
In this case, the assigned channels are displayed. For more information, refer to "Input
C
Channels" on
D
assigned, only the [SOLO], and [ON] buttons and channel faders are displayed.
E
F
When the remote target setting on the 01V96 is set to User Defined, you can
When the remote target setting on the 01V96 is set to User Defined, you can
page 8
and "Output Channels" on
page
12. If the Group Master Fader is
01V96 Editor—Owner's Manual
13