DJ68-00092B-EN 12/29/01 9:19 AM Page 1 Operating Instructions VC5815H VC5814H VC5813H VACUUM CLEANER ❈ Before operating this unit, please read the instructions carefully.
DJ68-00092B-EN 12/29/01 9:19 AM Page 2 FEATURES Features include automatic cord rewind and dust indicator. NOTE : Not all models have the same features. IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner.
DJ68-00092B-EN 12/29/01 9:19 AM Page 3 IDENTIFICATIONS OF PARTS REMOTE POWER CONTROL (REMOTE CONTROL MODEL ONLY) SUCTION HOSE TUBE* SUCTION REGULATOR CORD REWIND BUTTON DUST-FULL INDICATOR CARRYING HANDLE BUTTON FOR SUCTION HOSE REMOVAL CLAMPER FOR DUST BAG COMPARTMENT FLOOR NOZZLE* RUG/FLOOR SELECTOR BELT-STRAP ASSY CREVICE-TOOL...
DJ68-00092B-EN 12/29/01 9:19 AM Page 4 ASSEMBLING THE VACUUM-CLEANER READY FOR USE 1) Connect the suction hose to the suction tube. 2) Connect the suction tubes together (depending on model). 3) Connect the nozzle to the suction tube. OPTION : EXTENDING : Holding the narrow part of the telescopic tube with one hand, pull the handle in the opposite direction with your...
DJ68-00092B-EN 12/29/01 9:19 AM Page 5 SUCTION POWER CONTROL (REMOTE CONTROL MODEL ONLY) Your cleaner has variable electronic suction control to give you greater versatility. Select the most suitable position according to cleaning needs. The suction capacity can be regulated steplessly by moving the slide to the desired positon SLDE THE PART “A”...
DJ68-00092B-EN 12/29/01 9:19 AM Page 6 USING & ASSEMBLING THE STRAP (OPTIONAL) This appliance is designed to be conveniently carried on your waist using the belt-strap accessory. When cleaning steps, curtains, shelves, etc, you can carry the unit with the strap over your shoulder. Ready for use 1) Insert the lockers into the holes on the cleaner, taking care of the lockers’...
DJ68-00092B-EN 12/29/01 9:19 AM Page 7 REPLACING THE DUST BAG 1) To open the dust cover of the dust bag com- 2) Remove the dust bag from the cleaner. partment, press the clamper upwards.(The clamper is located at the front of the dust cover) 3) After removing the used dust bag, insert the 4) Press the dust cover down gently until the cardboard bag collar of the new dust bag into...
DJ68-00092B-EN 12/29/01 9:19 AM Page 8 THERMAL CUT-OUT PROTECTION The vacuum cleaner is provided with a self-resetting thermal cut-out protection which automatically shut off current on over heating. Overheating can be caused by blockage in the filter, nozzle, tube or hose. After removing the cause and cooling the motor, vacuum cleaner automatically start again.