Memorizing The Channels; Selecting The Video Signal Source - Samsung HC-R4741W Owner's Instructions Manual

O
P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna) and
cable channels. After the available channels are memorized, use the CH
to scan through the channels. This eliminates the need to change channels by entering the
channel digits.

Selecting the Video Signal Source

Before your TV can begin memorizing the available channels, you must specify the type of
signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button.
Press the ... or † button to select
"Channel", then press the ENTER
button.
2
Press the ENTER button to select
"Air/CATV".
Press the ... or † button to select
"Air", "STD", "HRC" or "IRC", then
press the ENTER button.
Press the EXIT button to exit.
• "STD", "HRC" and "IRC" identify various types of cable TV systems. Contact your local cable
company to identify the type of cable system that exists in your particular area. At this point the
signal source has been selected. Proceed to "Storing Channels in Memory".
• Subscription cable services require service-specific requirement for viewing.
TV Channel
Air/CATV : Air
Auto Program
Favorite Channels
œ
Fine Tune 00
Add/Delete
œ - - - - √
Name
Move Enter Return
TV Channel
Air/CATV : Air Air
Auto Program STD
HRC
Favorite Channels
œ
Fine Tune IRC 00
Add/Delete
œ - - - -
Name
Move Enter Return
English - 26
and CH
√
√
√
√
√
œ If you are connected to an
antenna, press the ... or †
button to select "Air".
œ If you connected cable, press
the ... or † button to select
the type of cable system:
"STD", "HRC" or "IRC".
buttons