Playing A Cassette - Samsung UW-17J11VD Owner's Instructions Manual

C18A_ENG_europe_17"_film
ENG
10/10/03 4:11 PM

Playing a Cassette

To play back any pre-recorded cassette, proceed as follows.
40
Page 40
1 Insert the cassette in the compartment, with the tape window
visible (facing upwards) and the open side of the cassette towards
the back.
Result: The tape counter, current function and recording
speed appear on the screen.
2
If the safety tab on the cassette is intact, press the PLAY/PAUSE
( ) button. Otherwise, the cassette is played automatically.
When a cassette is loaded, the tape position is optimised
automatically to reduce disturbance (Auto Tracking). If the
end of the tape is reached during playback, the cassette is
rewound automatically.
3 If you wish to stop the playback temporarily, press the
PLAY/PAUSE ( ) button again.
If noise bars appear in the picture, refer to "Adjusting the
Picture Quality during Playback" on page 44.
When you have been using the still mode for more than
about five minutes, the VCR will automatically play to
protect the cassette and video heads.
4 To return to normal playback, press the PLAY/PAUSE (
button again.
5
Press the STOP ( ) button to stop the playback. To eject the
cassette, press the OPEN/CLOSE (
When playing back a cassette, you cannot watch a
television programme.
Depending on the cassette tape, If the volume setting
is 35 or greater, the picture may flicker on the screen.
Reduce the volume.
)
) button.