Table of Contents
Advertisement
Available languages
Available languages
OPERATING THE RECEIVER
Main Menu
After installing your cable system and STB with appropriate connectors.
Plug in the AC main power and switch on the receiver.
Press MENU key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed.
For the sub-menus Installation, Channel Organising and
Change PIN Code you need the PIN Code.
Before you begin with the "Installation" menu,
you should check in the 4th menu "System Setup"
whether all the information there is applicable for you.
To show and hide the help message, press the
YELLOW(ALT) key.
By default the help message is shown.
1. Installation
The menu provides settings for customizing, adding new
services and displaying the status of the receiver.
Select "Installation" in the main menu mode to select the
sub menu.
Enter the PIN Code.
If you have not entered your own PIN Code then the
PIN Code 0000 applies, which was set at the factory.
GB-16
D
I
G
I
T
A
L
C
A
B
L
E
OPERATING THE RECEIVER
1.1 Scanning
To tune-in new channels and weak signals, the STB has
been provided with "Scanning" where the channel data can
be entered by the user. After selecting the "Scanning" from
the Installation Menu, the following screen will be displayed:
Input the frequency of the Channel you want to find.
Input the Network ID of the Channel you want to find.
Ask your cable operator.
Select the Modulation of the Channel you want to find.
You can select the value of 16, 32, 64, 128, 256.
Input the symbol rate of Channel you want to find.
After select option, press OK key to start the scan process.
1.2 Parental Control
Parental rating protects your children from adult content.
This option is set in Installation
Parental Control menu.
Use the
/
keys to select age of the youngest of yours
children then OK to save this setting.
All services sent for age greater than set, will be blocked and
request to enter Parental Rating PIN code will be shown.
If you want blocked all services select "ALL BLOCKED".
By default all services are "UNBLOCKED".
Please enter the PIN Code.
This banner is shown if service is rated for age greater than
set in Parental Control menu. Enter four digits PIN code to
hide this banner and show service content.
Factory PIN Code is 0000, and you can change it in
Change PIN Code menu.
R
E
C
E
I
V
E
R
GB-17
Advertisement
Chapters
Table of Contents
