Panasonic AJ-FX216 Operating Instructions Manual page 21

C. Single Spot or Quad Playback Picture
Sequences
1. Repeat procedures A (Single Spot Picture) to moni-
tor a single spot playback picture or procedures B
(Multi Spot Picture) to monitor quad playback pic-
tures.
Note: To monitor quad multi spot pictures, press
button 1 ( ). Sequential 3x3 and 4x4 play-
back pictures are not available.
2. Press the SEQUENCE/ALARM RESET button for
sequential display of playback pictures.
Note: Sequential pictures appear in the last select-
ed mode.
Sequential single spot pictures are displayed
on a single picture screen, and sequential quad
pictures on a quad screen.
SEQENCE
ALARM RESET
Example of single spot
playback picture sequence
Playback Picture of CH 3
Playback Picture of CH 6
Example of quad
playback picture sequence
Playback Picture
of CH 1
Playback Picture
of CH 3
Playback Picture
of CH 5
Playback Picture
of CH 7
3. To cancel sequential picture display, press the
desired camera selection button.
The selected playback picture appears on the sin-
gle picture screen of the monitor.
Playback Picture
of CH 2
Playback Picture
of CH 4
Playback Picture
of CH 6
Playback Picture
of CH 8
D. Still Playback Picture
1. Repeat procedures A (Single Spot Picture) or pro-
cedures B (Multi Spot Picture) to monitor playback
pictures.
2. Set the MODE SELECT/CAMERA SELECT switch to
MODE SELECT.
3. Press button 16 (STILL ON). The STILL ON indicator
lights.
4. Set the MODE SELECT/CAMERA SELECT switch to
CAMERA SELECT.
5. Press one of the camera selection buttons whose
indicator is lit.
The LED on the pressed button starts blinking, and
the picture corresponding to that button appears
still on the monitor.
The word STILL appears blinking on the monitor
screen.
Normal Playback Picture
Still Picture (The word " STILL" blinks)
Still Picture (The word "STILL" blinks)
-18-
16
STILL ON
ENTRANCE
STILL
ENTRANCE
Normal Playback Picture
STILL