Troubleshooting Guide - Kenwood KDV-S230P Instruction Manual

Hide thumbs Also See for KDV-S230P:
Table of Contents

Advertisement

Troubleshooting Guide

What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
?
No sound can be heard, or the volume is low.
 Mute is turned on.
 Turn off Mute.
?
The sound/picture skips on a DVD/VCD/CD.
 The disc is scratched or dirty.
 Clean the disc, referring to the section on
"Disc cleaning" (see page 8).
?
A VCD cannot be played using menus.
 The VCD disc being played is not compatible with
P.B.C.
 Menu playback is available only with VCD discs
recorded with P.B.C.
?
The subtitle is not displayed.
 The DVD disc being played does not contain the
recording of subtitles.
 The subtitle cannot be displayed when the
DVD disc being played does not contain the
recording of subtitles.
?
The voice (or subtitle) language cannot be
changed.
 The DVD disc being played does not contain the
recording of more than one audio (or subtitle)
language.
 The voice (or subtitle) language cannot be
changed when the DVD disc being played
does not contain the recording of more than
one voice (or subtitle) language.
?
The specified disc does not play, but another one
plays instead.
 The specified disc is quite dirty.
 Clean the disc.
 The disc is upside-down.
 Load the disc with the labeled side up.
 The disc is severely scratched.
 Try another disc instead.
?
Cannot perform operations for MP3 Folder List,
MP3 Play Mode, Program Play or Random Play
during MP3 playback.
 'FOLDER LIST' is set to "NO MENU" on the Setup
menu.
 Set 'FOLDER LIST' to "WITH MENU" (see
page21).
24
|
English
The messages shown below display your
systems condition.
"THERMAL PROTECTION PLEASE SHUT OFF POWER"
: The protective circuit in the unit activates when the
temperature inside the DVD player exceeds 60°C (140°F),
stopping all operation.
 Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
To eject the disc in this situation, turn the power off
and then turn it back on.
"NO DISC"
: No disc is inserted in the unit.
"WRONG REGION"
: A DVD with the wrong region code was inserted into
the unit.
"DISC ERROR"
: A disc that cannot be played in the unit was inserted.
"INVALID ENTRY"
: The disc inserted contains damaged or non-standard
data.
"PASSWORD INCORRECT"
: The password entered does not match the one
registered.
"NEW PASSWORD NOT CONFIRMED"
: Appears if the second new password entered does not
match the first one when changing the password.
 When you enter the new password, you are required
to enter the same password twice for confirmation
purposes.

Advertisement

Table of Contents
loading

Table of Contents