Basic Operation; General Functions - Kenwood KDC-W7041U Instruction Manual

Basic Operation

Release
AUX
Auxiliary input
(Rear side)

General functions

Power/Source Select button
Turns on the power.
When the power is ON, select a source.
SRC Select mode 1: Press the [SRC] button and then
turn the Control knob or push it toward left or right.
To determine the selected source, press the Control
knob.
SRC Select mode 2: Pressing this button each time
switches between sources.
Tuner ("TUNER") , USB or iPod ("USB" or "iPod"), CD
("Compact Disc") , Auxiliary input ("AUX"), and Standby
("STANDBY")
Press at least 1 second to turn off the power.
⁄
• When the power is ON, the <Security Code> (page
16) is displayed as "CODE ON" or "CODE OFF".
• The SRC Select mode can be set in "MENU" > "SRC
Select" of <Function Control> (page 6).
• When an optional accessory is connected, the
source name for each device appears.
• This unit automatically turns full power OFF after 20
minutes lapses in Standby mode in order to save the
vehicle's battery. The time until full power OFF can
be set in "Power OFF" of <Function Control> (page
6).
• When connection of the iPod is recognized, the
source display changes from "USB" to "iPod".
• USB (iPod) source is recognized as CD source on the
connected unit.
Volume control [AUD]
Turn the knob to adjust the volume.
Attenuator [ATT]
Turning the volume down quickly.
When the volume is reduced, the "ATT" indicator
flashes.
4
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
[AUD]
[1]
[ATT] [SRC]
[SRC]
[2] [3] [4] [5] [6]
Muting volume upon reception of phone call
When there is a call, "CALL" is displayed and the
audio system is paused. When the call ends, "CALL"
disappears and the audio system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
⁄
• To use the TEL Mute feature, you need to hook
up the MUTE wire to your telephone using
a commercial telephone accessory. Refer to
<Connecting Wires to Terminals> (page 27).
Auxiliary input
Connect a portable audio device with mini-plug
cable (3.5 ø).
⁄
• Use the mini-plug cable which is stereo type and
does not have any resistance.
• The auxiliary input requires the setting made in "MENU"
> "Built in AUX" of <Function Control> (page 6).
Subwoofer output
Switches between ON ("SUB WOOFER ON") and OFF
("SUB WOOFER OFF") each time pushing toward down
for at least 2 seconds.
⁄
• This function requires the setting made in "MENU" >
"SWPRE" of <Function Control> (page 6).
Function Control
Pressing this button allows you to set various
functions using the Control knob. Refer to <Function
Control> (Page 6).
Category Function of setup item
MENU Allows you to set up the environment.
DISP Allows you to set up the display.
Text/Title scroll
Scrolls the CD, audio file, and Radio text display when
pushing toward up for at least 2 seconds.
Control knob
[FNC] [TI]
USB Terminal
Auxiliary input
Control knob
[FNC]
Control knob