Radius Server Configuration - Dell PowerEdge M420 Configuration Manual

RADIUS Server Configuration

From the RADIUS Server Configuration page, you can add a new RADIUS
server, configure settings for a new or existing RADIUS server, and view
RADIUS server status information. The RADIUS client on the switch
supports up to 32 named authentication and accounting servers.
To access the RADIUS Server Configuration page, click System →
Management Security → RADIUS Server Configuration in the navigation
panel.
Figure 9-23. RADIUS Server Configuration
Adding and Configuring RADIUS Server Information
To configure a RADIUS server:
1 Open the RADIUS Server Configuration page.
2 Click Add to display the Add RADIUS Server page.
3 Specify the IP address of the RADIUS server.
Controlling Management Access
201