Connecting The Image Input Terminals - NEC NC1500C User Manual

2. Installation and Connection

2-2. Connecting the image input terminals

Your projector has four image input terminals, namely, the HDSDI A input terminal, the HDSDI B input terminal, the DVI-D A
input terminal, and the DVI-D B input terminal.
• HDSDI A/B input terminal (SDI A/SDI B) ------------ Inputs serial digital images from a Video Server or Video source.
• DVI-D A/B input terminal (DVI A/DVI B) ------------- Inputs digital RGB signals from a PC.
75Ω coaxial cable
• Information for Reducing Radiation of Electromagnetic Waves
To reduce unnecessary radiation of electromagnetic waves, use the supplied ferrite clamp core.
• Mounting the ferrite clamp core
1
Open the accessory ferrite clamp core and attach it to the DVI-D signal cable.
When doing so, attach this as close as possible to the end that goes to the projector.
* Push the catch to open the ferrite clamp core.
2
Close the ferrite clamp core tightly.
3
Fix the supplied band to the signal cable as a stopper.
* Pull the end of the band to tighten it. Cut off the surplus of the band.
NOTE
Be sure to use the ferrite clamp core at the end of the DVI-D signal cable.
14
SDI-A
SDI-B DVI-A
CINEMA
SYSTEM
REMOTE
RS-232C
IN
Ferrite clamp core (accessory)
DVI-B
PC CARD USB
DVI-D signal cable
GP I/O
LAN-A LAN-B
Band