Remote Reception - Canon 3301B002 On-Screen Manual

Using Various Receiving Functions
>
Contents Faxing > Using Various Receiving Functions
Using Various Receiving Functions
The machine has various receiving functions as follows.
For details, refer to the on-screen manual:
Fax Reception Rejection
Select ON in Fax reception reject to reject faxes from the uninformed numbers, the numbers which
are not registered to the coded speed dial, or the numbers registered as reject number.
(A) Recipient's fax/telephone number is not registered to the coded speed dial.
(B) Recipient's fax/telephone number is registered to the rejected number.
(C) Recipient's fax/telephone number is not informed.

Remote Reception

If the machine is located away from the telephone, pick up the handset of the telephone connected
to the machine and dial 25 (the remote reception ID) to receive faxes (remote reception).
The remote reception can be enabled or disabled with Remote RX.
Select ON to change Remote RX ID (remote reception ID).
Settings for Receiving Faxes
The various settings of the machine for receiving faxes are listed below. Change the settings as
necessary.
For details, refer to the on-screen manual:
ECM RX
Receives faxes in ECM (Error Correction Mode). When the sender's fax machine is compatible with
ECM, it resends the fax after correcting errors automatically.
Fax priority mode
Selects the detailed settings when the receive mode is set to Fax priority mode.
Advanced Guide
.
Advanced Guide
.
Advanced Guide
Page 93 of 997 pages
Troubleshooting