Sending Faxes - Canon 3301B002 On-Screen Manual

Sending Faxes

>
Contents Faxing > Sending Faxes
Sending Faxes
This section describes the operation to send a fax with the Numeric buttons and to register the
recipient's numbers to the one-touch speed dial and send a fax. For other operations, refer to the on-
screen manual: Advanced Guide
Sending a Fax with the Numeric Buttons
Redialing the Number Dialed with the Numeric Buttons
Sending a Fax with the One-Touch Speed Dial
Registering Recipient's Numbers to the One-Touch Speed Dial
Adjusting the Sending Quality
Note
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is
connected through a PBX or other telephone switching systems, you have to dial the outside line
access number first, and then the number of the party you are calling.
Sending a Fax with the Numeric Buttons
1.
Preparing for sending a fax.
Make sure that the power is turned on.
(1)
Operation Panel
See
Load a document on the Platen Glass or in the ADF.
(2)
Loading Originals.
See
Important
When sending a double-sided document, set the document on the Platen Glass. You
cannot scan double-sided documents from the ADF.
Note
For details on the types and conditions of document which you can fax, see
Can Load .
Press the FAX button.
(3)
The fax standby screen will appear.
Adjust the image quality (fax resolution) or density (scan contrast) as necessary.
(4)
See Adjusting the Sending Quality
2.
Sending the fax.
When the document was loaded on the Platen Glass:
Use the Numeric buttons to dial the recipient's number.
(1)
.
.
.
Advanced Guide Troubleshooting
Originals You
Page 79 of 997 pages