Cannot Scan At The Correct Size - Canon 2921B002 On-Screen Manual

Cannot Scan at the Correct Size

Page 729 of 815 pages
> > MP Navigator EX Problems
Advanced Guide Troubleshooting > Cannot Scan at the Correct Size
Cannot Scan at the Correct Size
Check 1: Make sure that the documents are placed correctly on the Platen.
Placing Documents
Check 2: Set Document Size to the actual document size and scan again.
If the matching size is not found, scan at a larger size and trim the image.
See the Toolbar (Trimming) in " Correct/Enhance Images Window " for details.
Page top