Starting Scangear (Scanner Driver) - Canon 2921B002 On-Screen Manual

Starting ScanGear (Scanner Driver)

>
Advanced Guide Scanning
ScanGear (Scanner Driver) > Starting ScanGear (Scanner Driver)
Starting ScanGear (Scanner Driver)
Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning
documents. ScanGear (scanner driver) can be started from MP Navigator EX or an application.
Follow these steps to start ScanGear (scanner driver).
Important
To scan via a network connection, set up the network environment before scanning.
Network Scan Settings
Starting from MP Navigator EX
Navigation Mode Screen
Follow these steps to start ScanGear (scanner driver) from the Navigation Mode screen of MP Navigator
EX.
Start MP Navigator EX and open the Navigation Mode screen.
1.
Starting MP Navigator EX
Point to Scan/Import and click Photos/Documents (Platen).
2.
The Scan/Import window opens.
Select the Use the scanner driver checkbox, then click Open Scanner Driver.
3.
The ScanGear (scanner driver) screen appears.
One-click Mode Screen
Follow these steps to start ScanGear (scanner driver) from the One-click Mode screen of MP Navigator
EX.
Start MP Navigator EX and open the One-click Mode screen.
1.
Starting MP Navigator EX
Click the corresponding icon.
2.
>
Scanning with Other Application Software
> Scanning with Advanced Settings Using
Page 514 of 815 pages