Fujitsu N7010 - LifeBook - Core 2 Duo 2.26 GHz Getting Started Manual

This convenient guide will lead you through the start-up
process and will also offer some valuable tips.
What's in the Box
Check to see that all of the following items are in the box:
❏ LifeBook notebook ❏ Drivers and Applications Restore Disc (Backup only)
❏ Lithium ion battery, pre-installed ❏ Microsoft® associated material (Backup only)
❏ AC adapter with power cord ❏ Recovery and Utility Disc (Backup only)
Depending upon your confi guration, the following items may also be shipped with your notebook:
❏ CyberLink PowerDVD for Blu-Ray ❏ Remote control and IR Receiver
confi guration ❏ TV Tuner Express card and software disc
❏ CyberLink MakeDisc ❏ Genuine Windows Vista® recovery
❏ CyberLink PowerDirector and utility disc.
*Digital Microphone
*Web Camera
Controls, Connectors,
and Access Points
Stereo Speaker
Second Display Panel
Status Indicator Panel
Touchpad Pointing Device
Fingerprint Recognition*/ Scrolling Sensor
Memory Stick/SD Card Slot
Wireless LAN/Bluetooth Switch
*Optional device; not present on all models.
RIGHT PANEL BACK PANEL
ExpressCard Eject Button eSATA Port
LAN (RJ-45) Port
ExpressCard Slot USB Ports
DC Power
Jack
Headphone Jack IEEE 1394 Port USB Ports Air Vents
Microphone Jack
BOTTOM PANEL
LEFT PANEL
Air Vents
(Multiple locations)
Lithium ion
Battery Bay
Optical Drive Optical Drive Eject Button
Initial Start Up
Display Panel Latch
Display Panel
Stereo Speaker
Support Button
Power/Suspend/Resume Button
Status Indicator Panel
Keyboard
HDMI Port
Air Vents
External Video Port Anti-Theft Lock Slot
Power/Suspend/Resume Button
Memory
Upgrade
Compartment
Dust Filter
Wireless LAN Switch
1. Open the Display Panel
• Ensure that your LifeBook is on a hard level surface and that
the air vents are not blocked.
Display Latch
• Lift the display, being careful not to touch the screen.
Button
• Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
• Plug the AC adapter into your notebook.
• Plug the power cord into the AC adapter.
• Connect the power cord to an electrical outlet.
3. Connect to Internet or Network
• Connect an Ethernet cable to the LAN jack on your notebook and
to an Internet access jack.
Important:
• During the setup procedure, do not disconnect the power supply,
press any buttons, shut down your computer, or use any peripheral
devices such as a mouse, keyboard, or remote control.
• You should not attach any external devices and do not put a DVD/CD in
your drive until you have gone through the initial power on sequence.
4. Booting the System
AC Adapter
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
• Press the Power/Suspend/Resume/button (above the keyboard) to
turn on the notebook. When you do this for the fi rst time, it will display
a Fujitsu logo on the screen. If you do nothing the system will load the
operating system, and then the Windows Welcome will begin.
LAN Jack 5. Installing Click Me!
• Check to be sure the WLAN switch is on.
In addition to an icon on the desktop, a dialog box will
automatically open that prompts you to run Click Me!.
If you choose not to run ClickMe! at this time, the
ClickMe! icon will appear on your desktop.
• When you click the Click Me! icon, your system will automatically
build the icon tray in the bottom right of the screen. This icon
provides links to utilities that you will frequently access. For the
latest drivers, go to http://www.fujitsu.com/us/support/.
DO NOT SHUT DOWN YOUR SYSTEM BEFORE THE
FIRST BOOT IS COMPLETED.
If the system is shutdown before the fi rst boot is
completed and Microsoft Windows is setup,
® ®
there is the risk that the system will not successfully
boot the next time you power up your notebook.
If this occurs, you will need to use the restore disc
to recover your system
6. Register
• Accept the Microsoft ® Windows ® Licensing Agreement and the
Fujitsu End User License Agreement to proceed.
• Select your User ID and Password during the "Welcome Screen."
• Keep a record of your User ID and password stored in a secure place.
• THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.
• Do not attempt to turn power on or off during this stage.
7. Registering Your LifeBook notebook
• Register your notebook with Fujitsu Service and Support via our
website at us.fujitsu.com/computers.
• You will need to be set up with an Internet Service Provider (ISP)
to register online.
8. Install Additional Software
• Close any open programs, applications or utilities
Insert software application disc into media drive.
• Open the application folder, select the set-up icon,
and load desired software.
• Restart your computer.
9. If you purchased the TV Tuner
Confi guration
• Please see the TV Tuner User's Guide for detailed instructions.
10. Access your User's Guide
• To take advantage of all the features of your new Fujitsu LifeBook
notebook, it is highly recommended that you read your electronic
User's Guide. It contains important detailed information about
your new computer. You can access your User's Guide
by selecting its icon from the screen desktop.
• If you are using Genuine Windows Vista®, Click
[Allow] in the User Account Control (UAC) box.
• Click [Continue]
• Select "I Agree" and click [Continue] in the License Agreement box.
• Select "User's Guide" from the "Utilities/Applications" category.
• Click [Install Selected Subsystems]
• The User's Guide will be copied to your hard drive in the
C:\Fujitsu\Manual directory. Shortcuts to the Users Guide
will be placed on your desktop and in the Start menu.
11. Restoring your System
• If the need arises, you can safely recover back to the factory
image by following a straight-forward procedure in
your User's Guide.
(For
Additional
Utilities)
Common Indicators
"Click Me!" Status Display Panels
The Status Display Panels are located above the keyboard as shown. Following are some common indicators.
Battery Charging Indicator
The Battery Charging indicator displays
whether or not the Lithium ion battery
is currently being charged.
Solid Green—Fully charged
or no battery installed
Solid Orange—Being charged
Blinking Orange—Charging suspended
because battery temperature too high.
Off—Not charging because AC adapter
is not connected.
Battery Status Indicator
This indicator shows how much charge
is available within the installed battery.
Green—solid Between 50%
and 100% charged
Orange—solid Between 13%
and 49% charged
Red—solid Between 0% and 12% charged
Red—blinking—There is a problem
with the battery
Off—No battery is installed or
the system is shut off.
Hard Drive/Optical Drive
Access Indicator
The Hard Drive/Optical Drive Access indicator
states whether your internal hard drive
or optical drive are being accessed.
Quick Tips
It takes approximately 3 hours to
charge a battery if the notebook
is turned off or is in suspended
mode. In battery mode the proces-
sor runs at half speed to conserve
battery life. SpeedStep is always
on. CPU speed will change
depending on the load.
Optimizing Battery Life
• Set power management setting
to Maximize Battery Life
• Adjust display brightness levels
to lowest comfortable setting
• Remove Express-Card when
not needed
• Utilize Suspend mode when
not using your notebook
• Turn off Wireless LAN or
Bluetooth when not in use
• Close unused programs
• Remove unused USB
powered devices
• Read the Power Management
section in your User's Guide
for additional features
Adjusting display brightness
• Fn + F6 to decrease brightness
• Fn + F7 to increase brightness
Drivers
NumLk Indicator
The NumLk indicator states that the
Look for the latest drivers on the
integral keyboard is set in ten-key
Drivers and Applications Restore
numeric keypad mode.
Disc, or go to us.fujitsu.com/
computers.
CapsLock Indicator
The CapsLock indicator states that your key-
Note: When using Media Center
board is set to type in all capital letters.
under Genuine Windows Vista®
ScrLk Indicator Premium in full screen mode,
the function keys' status cannot
The ScrLk indicator states that
be seen on the LCD panel. If you
your scroll lock is active.
"minimize" or "restore down"
(shrink) the window, the function
keys' status will appear