Password; Enable Password - Dell PowerConnect 5424 Command Line Interface Manual

password

The password Line Configuration mode command specifies a password on a line. Use the no form of this
command to remove the password.
Syntax
• password password [encrypted]
• no password
• password — Password for this level, from 1 to 159 characters in length.
• encrypted — Encrypted password to be entered, copied from another device configuration.
Default Configuration
No password is required.
Command Mode
Line Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example specifies a password 'secret' on a line.
Console (config-line)# password secret

enable password

The enable password Global Configuration mode command sets a local password to control access to
normal and privilege levels. Use the no form of this command to remove the password requirement.
Syntax
• enable password [level level] password [encrypted]
• no enable password [level level]
• password — Password for this level, from 1 to 159 characters in length.
level level — Level for which the password applies. If not specified the level is 15. (Range: 1 - 15)
•
• encrypted — Encrypted password entered, copied from another device configuration.
Default Configuration
This command has no default configuration.
92
AAA Commands