Table of Contents
Advertisement
Notes
• The actual frame rate and bit rate may be different
depending on the image size, shooting scene, or
network condition.
• When Adaptive rate control is set to On, the
maximum transmission rate will be the values set in
Frame rate and Bit rate.
Image quality
Set the JPEG image quality.
Selectable values are from Level 1 to Level 10.
When Level 10 is selected, the best image quality is
achieved.
Bandwidth control
Limits the network bandwidth for the JPEG image data
output from the camera.
Note
Audio may be interrupted depending on the selected
bandwidth. In this case, select a wider bandwidth.
OK/Cancel
See "Buttons common to every menu" on page 27.
Streaming Tab
Use this tab to set the items for the transmission by
unicast or multicast.
Unicast streaming
Specify the transmission port numbers of the MPEG4/
H.264 video data and audio data to be used when UDP
(Unicast) is selected from the Connection drop-down
list in the Other panel on the main viewer.
Video port number
Specify the transmission port number of the MPEG4/
H.264 video data. It is initially set to 50000. Specify an
even number from 1024 to 65534. Two port numbers
(the number specified here and an odd number with 1
added to the specified number) are actually used for
video data communication and control.
Audio port number
Specify the transmission port number of the audio data.
It is initially set to 50002. Specify an even number from
1024 to 65534. Two port numbers (the number specified
here and an odd number with 1 added to the specified
number) are used for audio data communication and
control.
Note
Specify different numbers for the video port number and
the audio port number.
Multicast streaming
Set whether the unit uses multicast streaming for
MPEG4/H.264 video data and audio data or not. It
reduces the transmission load on the system by having a
computer of the same segment network receive the same
transmitting data.
Select On to allow, or Off not to allow multicast
sending.
When you select On, set Multicast address, Video port
number and Audio port number properly.
Multicast address
Type the multicast address used on the multicast
streaming.
Video port number
Specify the MPEG4/H.264 video transmission port
number used for the multicast streaming. It is initially
set to 60000. Specify an even number from 1024 to
65534. Two port numbers (the number specified here
and an odd number with 1 added to the specified
number) are used for video data communication and
control.
Audio port number
Specify the audio transmission port number used for the
multicast streaming. It is initially set to 60002. Specify
an even number from 1024 to 65534. Two port numbers
(the number specified here and an odd number with 1
added to the specified number) are used for audio data
communication and control.
Note
Specify different numbers for the video port number and
the audio port number.
OK/Cancel
See "Buttons common to every menu" on page 27.
Setting the Camera Image and Audio — Camera Menu
37
Hide quick links:
Advertisement
Table of Contents
