Table of Contents
Advertisement
Off: Multiple users can control pan, tilt and zoom at the
same time. When multiple users control these
functions at the same time, the last operation has
priority.
Operation time
Sets the time length for a user who has control authority.
The selectable range is from 10 to 600 seconds. This is
effective when Exclusive control mode is set to On.
Maximum wait number
Sets the number of users who are permitted to wait for
their turn for control authority during operation by one
user. The selectable number is from 0 to 10. This is
effective when Exclusive control mode is set to On.
Notes
• To use Exclusive control mode, the date and time of
the system and the connected computer must be set
correctly first.
• To use Exclusive control mode, do not disable the
Web browser Cookie. If it is disabled, this mode
cannot be used.
• When you change the Exclusive control mode
setting, click Refresh on the Web browser to reflect
the change when opening the main viewer page.
Sensor input mode
Set the detection mode of the signal input to the sensor
input terminal of the system.
Note
Sensor input mode configuration is not available for
SNT-EP104 and SNT-EP154.
Normally open: Detects the alarm when the sensor
input is short-circuited.
Normally closed: Detects the alarm when the sensor
input is open-circuited.
Camera tampering detection
Select On to activate the function to detect the camera
shaking. When you select On, you can select the Tamper
level.
Note
The camera tempering detection is not available on the
SNT-EP104 and SNT-EP154.
OK/Cancel
See "Buttons common to every menu" on page 27.
30
Configuring the System — System Menu
Date & time Tab
Current date & time
Displays the date and time set on the unit.
Note
After you have purchased the camera, be sure to check
the date and time of the camera and set as necessary.
PC clock
Displays the date and time set on your computer.
Date & time format
Select the format of date and time to be displayed in the
main viewer from the drop-down list.
You can select the format between yyyy-mm-dd
hh:mm:ss (year-month-day hour:minutes:seconds),
mm-dd-yyyy hh:mm:ss (month-day-year
hour:minutes:seconds), and dd-mm-yyyy hh:mm:ss
(day-month-year hour:minutes:seconds).
Adjust
Select how to set the day and time.
Keep current setting: Select if you do not need to set
the date and time.
Synchronize with PC: Select if you want to
synchronize the unit's date and time with the
computer.
Manual setting: Select if you want to set the unit's date
and time manually.
Select the year, month, date, hour, minutes and
seconds from each drop-down list.
Synchronize with NTP: Select if you want to
synchronize the unit's date and time with those of the
time server called NTP server (Network Time
Protocol).
Set the NTP server when Synchronize with NTP is
selected.
Hide quick links:
Advertisement
Table of Contents
