Installing A Serial Port Adapter In The Riser-Card Cage - Dell GX620 - 3.6GHz Desktop 1GB RAM 80GB Windows XP SFF User Manual

Installing a Serial Port Adapter in the Riser-Card Cage

Follow the procedures in
1
Remove the riser-card cage:
2
Check any cables connected to cards through the back-panel openings. Disconnect any
a
cables that will not reach the riser-card cage once they are removed from the computer.
Gently pull on the handle and lift the riser-card cage up and away from the computer.
b
If you are installing a new serial port adapter, remove the filler bracket to create an empty card-
3
slot opening. If you are replacing an adapter that is already installed in the computer, remove the
adapter. If necessary, disconnect any cables connected to the adapter. Grasp the serial port
adapter by its top corners, and ease it out of its connector.
Prepare the serial port adapter for installation.
4
CAUTION:
To guard against electrical shock, be sure to unplug your computer from its electrical
outlet before installing any cards or adapters.
Gently push the release tab on the adapter retention latch.
5
"Before You Begin."
1 riser-card cage
2 handle
3 riser cards (2)
1
2
3
141