Viewing The Communication Activity Report At Regular Intervals (Communication Activity Report); When An Alarm Sounds And Awarning Message Is Displayed - Sharp MX-M202D Operation Manual

VIEWING THE COMMUNICATION ACTIVITY
REPORT AT REGULAR INTERVALS
Your machine keeps a record of the most recent 50 transactions (both transmissions and receptions) that were
performed. The record includes the date of the transaction, the other party's name, the duration, and result. You can
have the report automatically printed when the number of transactions exceeds 50, or at a specified time. This
allows you to check the machine's activity at regular intervals.
The machine is initially set (factory default setting) to not print the report. To have the report printed, change the
setting in the system settings. (See "LIST SETTING - AUTO LISTING" on page 99.)
• Refer to the table on "WHEN A TRANSACTION REPORT IS PRINTED" (page 90) for the notes that appear in
Note
the TYPE/NOTE column.
• The activity report can also be printed out on demand. (See "PRINTING LISTS OF PROGRAMMED
INFORMATION, SETTINGS, AND COMMUNICATION ACTIVITY" on page 85.)
WHEN AN ALARM SOUNDS AND A
WARNING MESSAGE IS DISPLAYED
When an error occurs during a transaction, an alarm will sound and a message will appear in the display. If one of
the following messages appears, follow the instructions in the table.
Message
(alarm sounds)
XXXXXX
Line error.
Maintenance required.
Call for service.
[OK]:RETURN
Please return X
original(s).
[START]:CONTINUE
Open TRAY xx and
add xxxx paper.
[OK]:RETURN
Remove paper from
the output tray and
press [OK].
Clear paper path.
Close the
cover.
92
(Communication activity report)
Meaning of message
An error prevented
completion of the
transaction.
It is time for maintenance
and inspection.
A misfeed occurred in the
SPF/RSPF.
A fax has been received
but the paper tray does not
have suitable paper.
The paper tray is open.
The upper part of the job
separator is full of paper.
A job separator error
occurred.
A paper misfeed occurred
in the output section.
A machine cover is open.
Solution
Try the transaction again.
Contact your dealer.
Reload the indicated
number of originals.
Add paper.
Close the paper tray.
Remove the paper.
Press the [CA] key to clear
the error.
Remove the misfed paper.
Close the cover.
Page
–
–
12
"LOADING PAPER" in the
Operation Guide for the
machine
–
–
–
"MISFEED REMOVAL" in
the Operation Guide for
the machine
–