Changing/Fitting Belt - Dyson DC07 Owner's Manual

Changing/fitting the
belt
CAUTION
• Turn power off, unplug
machine and allow
machine to cool for 1
hour before changing/
fitting belt. Failure to do
so could result in electric
shock or personal injury.
• Ensure soleplate is in
correct position before
use.
• Make sure all parts have
been replaced securely
before using your
machine.
Remove wand and turn
machine upside down.
A
B
A Undo fasteners using a B Remove dirt or debris and
coin, slide back end caps check spindle is clean.
and remove soleplate.
12
C
D
C To replace the belt,
remove the brushbar, loop
belt around brushbar and
feed through hole.
D Check end caps are in
place.